I tried your steps and I had issues with the web server. so I did some digging and found out how to copy it directly to the USB drive
Steps 1 and 2 are the same
3. Copy the new . bin file to the root directory of the USB drive.
4. Safely remove the USB drive
5. Re insert the USB drive into the TPlink
6. Power up the tp link like normal.
7 SSH into the router.
8 command cd /mnt/usb
9 command ls this command will show the contents of the directory. Verifiy that the bin file is in the directory.
10 Command cp ***.bin /tmp
11 command cd /tmp
12 command ls again just to make sure the file is there,
13 Goes back to Step 7 of nec240 and procede.
Sorry that I am new and I do not know how to add the fancy formatting here. I also hope this helps
Steps 1 and 2 are the same
3. Copy the new . bin file to the root directory of the USB drive.
4. Safely remove the USB drive
5. Re insert the USB drive into the TPlink
6. Power up the tp link like normal.
7 SSH into the router.
8 command cd /mnt/usb
9 command ls this command will show the contents of the directory. Verifiy that the bin file is in the directory.
10 Command cp ***.bin /tmp
11 command cd /tmp
12 command ls again just to make sure the file is there,
13 Goes back to Step 7 of nec240 and procede.
Sorry that I am new and I do not know how to add the fancy formatting here. I also hope this helps
