on the page for open wrt diy for 1.0 it says "Be sure to use one image from our served files, because they are customized to work together with the install.zip." is that referring to the tar.gz file located here? [stable.openwrt.piratebox.de] or is it just the bin file you are referring to.
From what I am understanding while reading everything.
1. I download install_piratebox.zip and the squashfs factory.bin from [stable.openwrt.piratebox.de]
2. I extract the install_piratebox.zip and move the "install" folder over into the usb, safely remove it, put it in the router, along with ethernet plugged into computer and then turn router on
3. go to 192.168.0.1 and do the firmware upgrade with the file I previously downloaded
from that point, it seems like most people have piratebox ssid show up during install but it never does for me. Openwrt installs, the wifi ssid dissapears because openwrt disables it in the network config. I'm able to telnet in afterwords and it shows openwrt installed but never shows any piratebox related files.
I have tried a few different usb sticks. Formated to fat32, only one partition but mount doesn't work like I showed above. I know it's gotta be something simple I am overlooking but I am just having trouble figuring it out. Thanks again for all the help. Not sure if this information is relevant or not but I just wanted to help clarify a bit more about what I am doing
From what I am understanding while reading everything.
1. I download install_piratebox.zip and the squashfs factory.bin from [stable.openwrt.piratebox.de]
2. I extract the install_piratebox.zip and move the "install" folder over into the usb, safely remove it, put it in the router, along with ethernet plugged into computer and then turn router on
3. go to 192.168.0.1 and do the firmware upgrade with the file I previously downloaded
from that point, it seems like most people have piratebox ssid show up during install but it never does for me. Openwrt installs, the wifi ssid dissapears because openwrt disables it in the network config. I'm able to telnet in afterwords and it shows openwrt installed but never shows any piratebox related files.
I have tried a few different usb sticks. Formated to fat32, only one partition but mount doesn't work like I showed above. I know it's gotta be something simple I am overlooking but I am just having trouble figuring it out. Thanks again for all the help. Not sure if this information is relevant or not but I just wanted to help clarify a bit more about what I am doing