Hello guys ,
I need your help/advice about a problem with my MR3020 .
Basically I have installed openwrt image (openwrt-ar71xx-generic-tl-mr3020-v1-squashfs-factory.bin ) and all seems to be OK , I'm able to log in by telnet or ssh with my new password .
The problem was born when I tried to install the pirate box . I had same problem found in another tread
[for]um.piratebox.cc/read.php?2,10804,10804
and here the suggestion was ...use a new installation method .
Currently I' m following update procedure but I'm not able to mount usb stick , this command cd /mnt/usb
return -ash: cd : can't cd to /mnt/usb :S
If I try only cd /mnt is ok but when try cd /usb I have same error
What is wrong ? I have already tried several usb stick ( single partition / fat32 ) and the switch is on 3G
Please help me
Thanks a lot in advance
BR
Pietro
I need your help/advice about a problem with my MR3020 .
Basically I have installed openwrt image (openwrt-ar71xx-generic-tl-mr3020-v1-squashfs-factory.bin ) and all seems to be OK , I'm able to log in by telnet or ssh with my new password .
The problem was born when I tried to install the pirate box . I had same problem found in another tread
[for]um.piratebox.cc/read.php?2,10804,10804
and here the suggestion was ...use a new installation method .
Currently I' m following update procedure but I'm not able to mount usb stick , this command cd /mnt/usb
return -ash: cd : can't cd to /mnt/usb :S
If I try only cd /mnt is ok but when try cd /usb I have same error
What is wrong ? I have already tried several usb stick ( single partition / fat32 ) and the switch is on 3G
Please help me
Thanks a lot in advance
BR
Pietro