Re: Endless installation MR3020(ver 1.8)

Hi Matthias,
Thanks for the response.
Apologies for the delayed reply.
I have used a FAT32 formatted USB stick.

No error in installation before dots.

I see this message in the log.
(I have rebooted after the break).
usb 1-1: new high-speed USB device number 2 using ehci-platform
[ 13.710000] usb 1-1: device descriptor read/64, error -71
[ 13.950000] usb 1-1: device descriptor read/64, error -71
[ 14.180000] usb 1-1: new high-speed USB device number 3 using ehci-platform
[ 14.310000] usb 1-1: device descriptor read/64, error -71
[ 14.550000] usb 1-1: device descriptor read/64, error -71
[ 14.780000] usb 1-1: new high-speed USB device number 4 using ehci-platform
[ 15.200000] usb 1-1: device not accepting address 4, error -71
[ 15.320000] usb 1-1: new high-speed USB device number 5 using ehci-platform
[ 15.740000] usb 1-1: device not accepting address 5, error -71
[ 15.740000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 28.730000] eth0: link down

Is the due to USB stick?

Thanks for all the help.

Cheers,
Bala.