Quantcast
Channel: PirateBox Forum - PirateBox OpenWrt
Viewing all articles
Browse latest Browse all 3254

Failed Upgrade from 0.60 on MR3020

$
0
0
I know there has been many upgrades in the past couple years, but my Piratebox was in a place where I did not have easy access to it on a regular basis. Tonight I tried to upgrade it to the latest version, but the following happened:

root@piratebox:/mnt/usb# mtd write -r openwrt-ar71xx-generic-tl-mr3020-v1-squash
fs-factory.bin firmware
Unlocking firmware ...

Writing from openwrt-ar71xx-generic-tl-mr3020-v1-squashfs-factory.bin to firmware ...
Rebooting ...
Bus error
root@piratebox:/mnt/usb# ping 192.168.1.1
Segmentation fault
root@piratebox:/mnt/usb# exit
Connection to 192.168.1.1 closed.

It has been more than 45 minutes since that happened. I can ping the Piratebox and it responds but I cannot telnet into it. If I try to SSH into it, it accepts my password and then immediately closes the connection. I have not turned it off because I am afraid doing so might make things worse. Some help would be appreciated.

EDIT: I shut it off and turned it back on again. It booted up and seems to be working fine now. Can you please delete this post?

Viewing all articles
Browse latest Browse all 3254