Another 'Reinstall Piratebox' topic - MR3040 v2.4 & NoCatSplash/NoDogSplash

Hi,

I've got a MR3040 v2.4 here. The end goal is have default page/splash appear when you connect to the PB Wifi - like when you connect to a hotel's wifi and it ask's you to login before access the internet.

Anyway first things first. I did have a working PB, when connected I could access 192.168.1.1 and see the PB forum page. Not sure what I did, but I broke something - I was playing with SSID and DHCP.

I've tried reinstalling the firmware and PB from USB - renamed /install/auto_package_done to /install/auto_package - but after boot it feels like not all of the software has not been installed e.g. I don't have a /opt folder.

Here's the log output - note the 4th line 'Something happend to extendRoot filesystem'

Jan 1 00:00:48 OpenWrt syslog.info syslogd started: BusyBox v1.19.4
Jan 1 00:00:48 OpenWrt user.notice root: /bin/box_installer.sh : executing run_test_installation_destination
Jan 1 00:00:48 OpenWrt user.notice root: /bin/box_installer.sh : Testing if installation destination by extendRoot is available.
Jan 1 00:00:48 OpenWrt user.notice root: /bin/box_installer.sh : Something happend to extendRoot filesystem. Printing debug output...
Jan 1 00:00:48 OpenWrt user.notice root: /bin/box_installer.sh : Mount output
Jan 1 00:00:48 OpenWrt user.notice root: rootfs on / type rootfs (rw)
Jan 1 00:00:48 OpenWrt user.notice root: /dev/root on /rom type squashfs (ro,relatime)
Jan 1 00:00:48 OpenWrt user.notice root: proc on /proc type proc (rw,noatime)
Jan 1 00:00:48 OpenWrt user.notice root: sysfs on /sys type sysfs (rw,noatime)
Jan 1 00:00:48 OpenWrt user.notice root: tmpfs on /tmp type tmpfs (rw,nosuid,nodev,noatime,size=14592k)
Jan 1 00:00:48 OpenWrt user.notice root: tmpfs on /dev type tmpfs (rw,noatime,size=512k,mode=755)
Jan 1 00:00:48 OpenWrt user.notice root: devpts on /dev/pts type devpts (rw,noatime,mode=600)
Jan 1 00:00:48 OpenWrt user.notice root: /dev/mtdblock3 on /overlay type jffs2 (rw,noatime)
Jan 1 00:00:48 OpenWrt user.notice root: overlayfs:/overlay on / type overlayfs (rw,relatime,lowerdir=/,upperdir=/overlay)
Jan 1 00:00:48 OpenWrt user.notice root: debugfs on /sys/kernel/debug type debugfs (rw,relatime)
Jan 1 00:00:48 OpenWrt user.notice root: /dev/sda1 on /mnt/usb type vfat (rw,noatime,fmask=0000,dmask=0000,allow_utime=0022,codepage=cp437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
Jan 1 00:00:48 OpenWrt user.notice root: /bin/box_installer.sh : dmesg | grep sd
Jan 1 00:00:48 OpenWrt user.notice root: [ 9.670000] sd 0:0:0:0: [sda] 7856127 512-byte logical blocks: (4.02 GB/3.74 GiB)
Jan 1 00:00:48 OpenWrt user.notice root: [ 9.670000] sd 0:0:0:0: [sda] Write Protect is off
Jan 1 00:00:48 OpenWrt user.notice root: [ 9.680000] sd 0:0:0:0: [sda] Mode Sense: 45 00 00 08
Jan 1 00:00:48 OpenWrt user.notice root: [ 9.680000] sd 0:0:0:0: [sda] No Caching mode page present
Jan 1 00:00:48 OpenWrt user.notice root: [ 9.680000] sd 0:0:0:0: [sda] Assuming drive cache: write through
Jan 1 00:00:48 OpenWrt user.notice root: [ 9.690000] sd 0:0:0:0: [sda] No Caching mode page present
Jan 1 00:00:48 OpenWrt user.notice root: [ 9.700000] sd 0:0:0:0: [sda] Assuming drive cache: write through
Jan 1 00:00:48 OpenWrt user.notice root: [ 9.710000] sda: sda1
Jan 1 00:00:48 OpenWrt user.notice root: [ 9.710000] sd 0:0:0:0: [sda] No Caching mode page present
Jan 1 00:00:48 OpenWrt user.notice root: [ 9.720000] sd 0:0:0:0: [sda] Assuming drive cache: write through
Jan 1 00:00:48 OpenWrt user.notice root: [ 9.720000] sd 0:0:0:0: [sda] Attached SCSI removable disk
Jan 1 00:00:48 OpenWrt user.notice root: /bin/box_installer.sh : dmesg | grep loop
Jan 1 00:00:48 OpenWrt user.notice root: [ 0.000000] Calibrating delay loop... 265.42 BogoMIPS (lpj=1327104)
Jan 1 00:00:48 OpenWrt user.notice root: [ 31.320000] loop: module loaded
Jan 1 00:00:48 OpenWrt user.notice root: /bin/box_installer.sh : dmesg | grep ext
Jan 1 00:00:48 OpenWrt user.notice root: /bin/box_installer.sh : Exiting box-installer routine
Jan 1 00:00:49 OpenWrt user.notice root: /bin/box_installer_start.sh : Initiating reboot after installation

Does anyone have any tips please?

Once I've got a working PB again, I'd like to install NoCatSplash or NoDogSplash or the like, via I guess opkg install

thanks!