Hi all,
I've followed the tutorial from here to get the OpenWRT on my Zsun device. I did have a bit of an issue with one of them, but it's no worry, as I was able to get it to work.
The second tutorial I used was the one just previously mentioned, this one here.
That one seemed to work, but I must have done something wrong with it. I am unable to get my Zsun to broadcast any longer.
I tried to read some of the past posts about setting up the unit and how if the Zsun is at 192.168.1.1 and my internet router is the same, I'll need to use the "sta" parameter. But that didn't quite work out as planned, and I believe I may have messed it up a bit.
I'm not upset in the slightest, but I figured I'd turn to the forum for further instruction. I can and have changed my regular network to be that of 192.168.0.1 with a subnet mask of 255.255.254.0 . I tried to get the Zsun unit back up, but it didn't work.
I understand I may need to connect an Ethernet jack to recover, but since I have another Zsun unit ( I wisely bought extra because I might screw it up) I wanted to attempt to do the Piratebox upgrade, but this time do it right.
What kinds of things would you need to know from me in order to assist me? I'm not the most proficient Linux user(my main computers are Windows based) But I do have some Linux devices at home, Pogoplugs running Debian and connecting to LMS, so I am fairly comfortable with the Linux command line.
Thank you in advance for any advice you can give me. And if it is possible to recover from my failure, it would be nice to know that too.
I've followed the tutorial from here to get the OpenWRT on my Zsun device. I did have a bit of an issue with one of them, but it's no worry, as I was able to get it to work.
The second tutorial I used was the one just previously mentioned, this one here.
That one seemed to work, but I must have done something wrong with it. I am unable to get my Zsun to broadcast any longer.
I tried to read some of the past posts about setting up the unit and how if the Zsun is at 192.168.1.1 and my internet router is the same, I'll need to use the "sta" parameter. But that didn't quite work out as planned, and I believe I may have messed it up a bit.
I'm not upset in the slightest, but I figured I'd turn to the forum for further instruction. I can and have changed my regular network to be that of 192.168.0.1 with a subnet mask of 255.255.254.0 . I tried to get the Zsun unit back up, but it didn't work.
I understand I may need to connect an Ethernet jack to recover, but since I have another Zsun unit ( I wisely bought extra because I might screw it up) I wanted to attempt to do the Piratebox upgrade, but this time do it right.
What kinds of things would you need to know from me in order to assist me? I'm not the most proficient Linux user(my main computers are Windows based) But I do have some Linux devices at home, Pogoplugs running Debian and connecting to LMS, so I am fairly comfortable with the Linux command line.
Thank you in advance for any advice you can give me. And if it is possible to recover from my failure, it would be nice to know that too.