So, if you did the quick update from 1.1.0 to 1.1.1 and deleted the complete content of your USB stick, then you can do the following trick which is possible since 1.1.0:
* Power off your PirateBox
* Take you USB stick to your computer
* Copy over the unfolded install folder to your USB stick (take care the folders are not dublicate)
* Create a folder called "auto_flash"
* Copy the corresponding image to your device from stable.openwrt.piratebox.de into the auto_flash folder
* Savely remove the USB stick from your computer
* Put the USB stick to your PirateBox
* Power your PirateBox online
That will reflash the device automatically with the new image file. Then will do several reboots to install the needed packages.
Give it a try. If it won't work as you would expect, let me know, then we need to do additional debugging.
best regards
Matthias
* Power off your PirateBox
* Take you USB stick to your computer
* Copy over the unfolded install folder to your USB stick (take care the folders are not dublicate)
* Create a folder called "auto_flash"
* Copy the corresponding image to your device from stable.openwrt.piratebox.de into the auto_flash folder
* Savely remove the USB stick from your computer
* Put the USB stick to your PirateBox
* Power your PirateBox online
That will reflash the device automatically with the new image file. Then will do several reboots to install the needed packages.
Give it a try. If it won't work as you would expect, let me know, then we need to do additional debugging.
best regards
Matthias