I had a working PirateBox with a TP-Link MR3020; but the USB was removed, modified, and finally everything in the memory was deleted.
Now, I need to regenerate the content on this USB drive (the piratebox functionallity), but I do not know how to do it. I have tried to put the install directory in the memory, but nothing happens when I start the Pirate Box
These are the ouputs of the commands:
Now, I need to regenerate the content on this USB drive (the piratebox functionallity), but I do not know how to do it. I have tried to put the install directory in the memory, but nothing happens when I start the Pirate Box
These are the ouputs of the commands:
root@OpenWrt:/etc/init.d# mount rootfs on / type rootfs (rw) /dev/root on /rom type squashfs (ro,relatime) proc on /proc type proc (rw,noatime) sysfs on /sys type sysfs (rw,noatime) tmpfs on /tmp type tmpfs (rw,nosuid,nodev,noatime,size=14592k) tmpfs on /dev type tmpfs (rw,noatime,size=512k,mode=755) devpts on /dev/pts type devpts (rw,noatime,mode=600) /dev/mtdblock3 on /overlay type jffs2 (rw,noatime) overlayfs:/overlay on / type overlayfs (rw,relatime,lowerdir=/,upperdir=/overlay) debugfs on /sys/kernel/debug type debugfs (rw,relatime) /dev/sda1 on /mnt/usb type vfat (rw,noatime,fmask=0000,dmask=0000,allow_utime=0022,codepage=cp437,iocharset=iso8859-1,shortname=mixed,utf8,errors=remount-ro) none on /proc/bus/usb type usbfs (rw,relatime) root@OpenWrt:/etc/init.d# ls -la /mnt/ drwxr-xr-x 1 root root 0 Jan 1 00:01 . drwxr-xr-x 1 root root 0 Jan 1 00:00 .. drwxr-xr-x 2 root root 0 Jan 1 00:01 ext drwxrwxrwx 3 root root 16384 Jan 1 00:20 usb root@OpenWrt:/etc/init.d# ls -la /mnt/usb drwxrwxrwx 3 root root 16384 Jan 1 00:20 . drwxr-xr-x 1 root root 0 Jan 1 00:01 .. drwxrwxrwx 3 root root 16384 Jan 1 1980 install root@OpenWrt:/etc/init.d# ls -la /mnt/usb/PirateBox ls: /mnt/usb/PirateBox: No such file or directory root@OpenWrt:/etc/init.d# ls -la /mnt/usb/install drwxrwxrwx 3 root root 16384 Jan 1 1980 . drwxrwxrwx 3 root root 16384 Jan 1 00:20 .. -rwxrwxrwx 1 root root 4096 Dec 17 2016 ._OpenWRT.img.gz -rwxrwxrwx 1 root root 4096 Dec 17 2016 ._auto_package -rwxrwxrwx 1 root root 4096 Dec 17 2016 ._cache -rwxrwxrwx 1 root root 4096 Dec 17 2016 ._kareha_3.1.4.zip -rwxrwxrwx 1 root root 4096 Dec 17 2016 ._piratebox_ws_1.1_img.tar.gz -rwxrwxrwx 1 root root 108531 Oct 5 2016 OpenWRT.img.gz -rwxrwxrwx 1 root root 99 Jan 1 1980 auto_package_done drwxrwxrwx 2 root root 32768 Dec 17 2016 cache -rwxrwxrwx 1 root root 222185 Oct 5 2016 kareha_3.1.4.zip -rwxrwxrwx 1 root root 237503 Oct 5 2016 piratebox_ws_1.1_img.tar.gz root@OpenWrt:/etc/init.d# ls -la /opt/piratebox ls: /opt/piratebox: No such file or directory root@OpenWrt:/etc/init.d# ls -la /opt/piratebox/www ls: /opt/piratebox/www: No such file or directory root@OpenWrt:/etc/init.d# cat /etc/pbx_custom_image PBX_auto_Image_2.3.2 root@OpenWrt:/etc/init.d# cat /etc/openwrt_release DISTRIB_ID="OpenWrt_backports" DISTRIB_RELEASE="12.09.2" DISTRIB_REVISION="r42647" DISTRIB_CODENAME="attitude_adjustment" DISTRIB_TARGET="ar71xx/generic" DISTRIB_DESCRIPTION="OpenWrt_backports Attitude Adjustment 12.09.2" DISTRIB_BACKPORT="V0.3-MaStr" root@OpenWrt:/etc/init.d# cat /opt/piratebox/version cat: can't open '/opt/piratebox/version': No such file or directory root@OpenWrt:/etc/init.d# cat /opt/piratebox/tmp/error.log cat: can't open '/opt/piratebox/tmp/error.log': No such file or directory root@OpenWrt:/etc/init.d# cat /opt/piratebox/tmp/break.log cat: can't open '/opt/piratebox/tmp/break.log': No such file or directory root@OpenWrt:/etc/init.d# cat /etc/config/network config interface 'loopback' option ifname 'lo' option proto 'static' option ipaddr '127.0.0.1' option netmask '255.0.0.0' config interface 'lan' option ifname 'eth0' option type 'bridge' option proto 'static' option ipaddr '192.168.1.1' option netmask '255.255.255.0' root@OpenWrt:/etc/init.d# cat /etc/config/wireless config wifi-device radio0 option type mac80211 option channel 11 option hwmode 11ng option macaddr c4:e9:84:a0:e0:84 option htmode HT20 list ht_capab SHORT-GI-20 list ht_capab SHORT-GI-40 list ht_capab RX-STBC1 list ht_capab DSSS_CCK-40 # REMOVE THIS LINE TO ENABLE WIFI: option disabled 1 config wifi-iface option device radio0 option network lan option mode ap option ssid OpenWrt option encryption none root@OpenWrt:/etc/init.d# dmesg | tail -n 20 [ 31.070000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 31.080000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A) [ 31.090000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 1700 mBm), (N/A) [ 31.090000] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2300 mBm), (0 s) [ 31.100000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A) [ 31.110000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) [ 31.560000] loop: module loaded [ 31.620000] ip_tables: (C) 2000-2006 Netfilter Core Team [ 31.790000] nf_conntrack version 0.5.0 (455 buckets, 1820 max) [ 32.080000] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 32.360000] batman_adv: B.A.T.M.A.N. advanced 2013.4.0 (compatibility version 14) loaded [ 36.850000] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 36.850000] device eth0 entered promiscuous mode [ 36.860000] ADDRCONF(NETDEV_UP): br-lan: link is not ready [ 37.410000] eth0: link up (100Mbps/Full duplex) [ 37.410000] br-lan: port 1(eth0) entered forwarding state [ 37.420000] br-lan: port 1(eth0) entered forwarding state [ 37.420000] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 37.440000] ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready [ 39.420000] br-lan: port 1(eth0) entered forwarding state root@OpenWrt:/etc/init.d# dmesg | grep sda [ 9.830000] sd 0:0:0:0: [sda] 60481536 512-byte logical blocks: (30.9 GB/28.8 GiB) [ 9.840000] sd 0:0:0:0: [sda] Write Protect is off [ 9.840000] sd 0:0:0:0: [sda] Mode Sense: 45 00 00 00 [ 9.840000] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 10.060000] sda: sda1 [ 10.060000] sd 0:0:0:0: [sda] Attached SCSI removable disk root@OpenWrt:/etc/init.d# ls /dev/sd* /dev/sda /dev/sda1 root@OpenWrt:/etc/init.d# ps PID USER VSZ STAT COMMAND 1 root 1504 S init 2 root 0 SW [kthreadd] 3 root 0 SW [ksoftirqd/0] 5 root 0 SW [kworker/u:0] 6 root 0 SW< [khelper] 63 root 0 SW [sync_supers] 65 root 0 SW [bdi-default] 67 root 0 SW< [kblockd] 96 root 0 SW [kswapd0] 144 root 0 SW [fsnotify_mark] 173 root 0 SW< [ath79-spi] 184 root 0 SW [mtdblock0] 189 root 0 SW [mtdblock1] 194 root 0 SW [mtdblock2] 199 root 0 SW [mtdblock3] 204 root 0 SW [mtdblock4] 209 root 0 SW [mtdblock5] 250 root 0 RW [kworker/0:1] 442 root 0 SWN [jffs2_gcd_mtd3] 472 root 0 SW [khubd] 481 root 0 SW [scsi_eh_0] 482 root 0 SW [usb-storage] 483 root 0 SW [kworker/0:2] 484 root 0 SW [kworker/u:2] 511 root 1504 S init 542 root 0 SW< [cfg80211] 622 root 0 SW< [bat_events] 649 root 1508 S /sbin/syslogd -C16 651 root 1488 S /sbin/klogd 653 root 872 S /sbin/hotplug2 --override --persistent --set-rules-file /etc/hotplug2.rules --set-coldplug-cmd /sbin 662 root 872 S /sbin/ubusd 725 root 1468 S /sbin/netifd 1130 root 1152 S /usr/sbin/dropbear -P /var/run/dropbear.1.pid -p 22 1310 root 1220 S /usr/sbin/dropbear -P /var/run/dropbear.1.pid -p 22 1314 root 1500 S /sbin/watchdog -t 5 /dev/watchdog 1366 nobody 956 S /usr/sbin/dnsmasq -C /var/etc/dnsmasq.conf 1391 root 1500 S /usr/sbin/ntpd -n -p 0.openwrt.pool.ntp.org -p 1.openwrt.pool.ntp.org -p 2.openwrt.pool.ntp.org -p 3 1392 root 1524 S -ash 1427 root 1496 R ps root@OpenWrt:/etc/init.d# cat /mnt/usb/install.log cat: can't open '/mnt/usb/install.log': No such file or directory root@OpenWrt:/etc/init.d#