Thanks for your reply Mathias
First a situation update. In my first post, I wrote that I turned on the wifi, well I didn't. It is now on. The only thing different from before is that WLAN is now green on the MR3020. However. I can connect to it only when I am on my home computer.
Now to answer your questions:
For the firewall, I only made change in the first 23 lines. My firewall configuration file look like this :
the content of /tmp/resolv.conf :
the content of /tmp/resolv.conf.auto
Finally when I ping 8.8.8.8, I get this :
First a situation update. In my first post, I wrote that I turned on the wifi, well I didn't. It is now on. The only thing different from before is that WLAN is now green on the MR3020. However. I can connect to it only when I am on my home computer.
Now to answer your questions:
For the firewall, I only made change in the first 23 lines. My firewall configuration file look like this :
Quote
config defaults
option syn_flood '1'
option input 'ACCEPT'
option output 'ACCEPT'
option forward 'ACCEPT'
# Uncomment this line to disable ipv6 rules
# option disable_ipv6 1
config zone
option name 'lan'
option network 'lan'
option input 'ACCEPT'
option output 'ACCEPT'
option forward 'ACCEPT'
config zone
option name 'wan'
option network 'wan'
option input 'ACCEPT'
option output 'ACCEPT'
option forward 'ACCEPT'
option masq '1'
option mtu_fix '1'
the content of /tmp/resolv.conf :
Quote
search lan
nameserver 127.0.0.1
the content of /tmp/resolv.conf.auto
Quote
# Interface lan
nameserver 8.8.8.8
nameserver 192.168.2.1
Finally when I ping 8.8.8.8, I get this :
Quote
root@OpenWrt:~# ping 8.8.8.8
PING 8.8.8.8 (8.8.8.8): 56 data bytes
^C
--- 8.8.8.8 ping statistics ---
20 packets transmitted, 0 packets received, 100% packet loss