MR3040 Installation Issue

Hardware= TL-MR3040 v2.1 + PNY 32GB 2.0 FD

## This is after reverting to standard firmware, updating, and finally reloading the openwrt firmware ( openwrt-ar71xx-generic-tl-mr3040-v2-squashfs-factory )
Change config/network*firewall*wireless as shown in tutorial, this time I ran "opkg update" and "opkg install kmod-usb-storage" (previous attempts gave serious problem with recognizing USB device) after update/install USB, restart router and then this :

BusyBox v1.19.4 (2014-02-27 00:57:47 UTC) built-in shell (ash)
Enter 'help' for a list of built-in commands.

_______ ________ __
| |.-----.-----.-----.| | | |.----.| |_
| - || _ | -__| || | | || _|| _|
|_______|| __|_____|__|__||________||__| |____|
|__| W I R E L E S S F R E E D O M
-----------------------------------------------------
BARRIER BREAKER (Bleeding Edge, r39755)
-----------------------------------------------------
* 1/2 oz Galliano Pour all ingredients into
* 4 oz cold Coffee an irish coffee mug filled
* 1 1/2 oz Dark Rum with crushed ice. Stir.
* 2 tsp. Creme de Cacao
-----------------------------------------------------
root@OpenWrt:~# cd /tmp
root@OpenWrt:/tmp# wget [piratebox.aod-rpg.de]
Connecting to piratebox.aod-rpg.de (87.237.121.137:80)
piratebox_0.6.3_all. 100% |*******************************| 14636 0:00:00 ETA
root@OpenWrt:/tmp# opkg update && opkg install piratebox*
Downloading [downloads.openwrt.org].
Updated list of available packages in /var/opkg-lists/barrier_breaker.
Installing piratebox (0.6.3) to root...
Installing kmod-fs-vfat (3.10.32-1) to root...
Downloading [downloads.openwrt.org].
Installing kmod-nls-cp437 (3.10.32-1) to root...
Downloading [downloads.openwrt.org].
Installing kmod-nls-cp850 (3.10.32-1) to root...
Downloading [downloads.openwrt.org].
Installing kmod-nls-iso8859-1 (3.10.32-1) to root...
Downloading [downloads.openwrt.org].
Installing kmod-nls-iso8859-15 (3.10.32-1) to root...
Downloading [downloads.openwrt.org].
Installing kmod-fs-ext4 (3.10.32-1) to root...
Downloading [downloads.openwrt.org].
Installing kmod-lib-crc16 (3.10.32-1) to root...
Downloading [downloads.openwrt.org].
Installing kmod-crypto-hash (3.10.32-1) to root...
Downloading [downloads.openwrt.org].
Installing block-mount (2014-01-29-71ea854364833c5dcb0800e092b45fed2c45910e) to root...
Downloading [downloads.openwrt.org].
Installing kmod-loop (3.10.32-1) to root...
Downloading [downloads.openwrt.org].
Installing losetup (2.21.2-2) to root...
Downloading [downloads.openwrt.org].
Configuring kmod-crypto-hash.
Configuring kmod-lib-crc16.
Configuring block-mount.
Configuring kmod-fs-vfat.
Configuring kmod-fs-ext4.
kmod: failed to insert /lib/modules/3.10.32/ext4.ko
Configuring losetup.
Configuring kmod-nls-cp437.
Configuring kmod-nls-cp850.
Configuring kmod-nls-iso8859-1.
Configuring kmod-nls-iso8859-15.
Configuring kmod-loop.
Configuring piratebox.
Please connect USB disk. If it is already plugged-in,
wait for a few seconds, and if nothing happens, please
reconnect the device. Keep in mind that your router's
ports may not be able to supply enough power to
spin-up a USB HDD.
......
USB disk is now available. Continuing...
/etc/init.d/piratebox: Mounting external USB storage...
/etc/init.d/piratebox: Creating swapspace...
32+0 records in
32+0 records out
Setting up swapspace version 1, size = 33550336 bytes
/etc/init.d/piratebox: Creating ext loop image...
/etc/init.d/piratebox: Creating piratebox loop image...
No PirateBox Image file found... loading from Internet
Connecting to piratebox.aod-rpg.de (87.237.121.137:80)
piratebox_ws_0.6_img 100% |*******************************| 174k 0:00:00 ETA
mount: mounting /dev/loop0 on /mnt/ext failed: Invalid argument
/etc/init.d/piratebox: ERROR: unable to mount ext image
mount: mounting /dev/loop0 on /mnt/ext failed: Invalid argument
/etc/init.d/piratebox: ERROR: unable to mount ext image
Something went wrong during package install on ext
Warning: Unable to locate ipset utility, disabling ipset support
Warning: Section @zone[1] (wan) cannot resolve device of network 'wan'
Warning: Section @zone[1] (wan) cannot resolve device of network 'wan6'
Warning: Section @zone[1] (wan) has no device, network, subnet or extra options
* Flushing IPv4 filter table
* Flushing IPv4 nat table
* Flushing IPv4 mangle table
* Flushing IPv4 raw table
* Flushing IPv6 filter table
* Flushing IPv6 mangle table
* Flushing IPv6 raw table
* Flushing conntrack table ...
* Populating IPv4 filter table
* Zone 'lan'
* Zone 'wan'
* Rule 'Allow-DHCP-Renew'
* Rule 'Allow-Ping'
* Forward 'lan' -> 'wan'
* Populating IPv4 nat table
* Zone 'lan'
* Zone 'wan'
* Populating IPv4 mangle table
* Zone 'lan'
* Zone 'wan'
* Populating IPv4 raw table
* Zone 'lan'
* Zone 'wan'
* Populating IPv6 filter table
* Zone 'lan'
* Zone 'wan'
* Rule 'Allow-DHCPv6'
* Rule 'Allow-ICMPv6-Input'
* Rule 'Allow-ICMPv6-Forward'
* Forward 'lan' -> 'wan'
* Populating IPv6 mangle table
* Zone 'lan'
* Zone 'wan'
* Populating IPv6 raw table
* Zone 'lan'
* Zone 'wan'
* Set tcp_ecn to off
* Set tcp_syncookies to on
* Set tcp_window_scaling to on
* Running script '/etc/firewall.user'
Command failed: Not found

## At this point the terminal window becomes unresponsive. Opening another and attemping to ping the device shows it is no longer available at it's designated IP, and I lose internet connectivity on the device I am on indicating it has taken over 1.1 -- The "PirateBox - Share Freely" SSID shows now, but before and after rebooting the device it no longer responds as *.11 but can only be accessed via *.1, at which it has no WAN access to update/retreive packages. So I have been resetting and restarting the process at this point... but after doing this for the entire weekend I'm getting a bit stumped, I was mostly just glad it went beyond the USB device prompt for once, but once again I'm at a loss for what the problem is. Thanks for the response and any help