Re: TP-MR3020 Ver 1.4 Issues
Sure here it is: 1) TL-MR3020 Ver. 1.4 2)openwrt-ar71xx-generic-tl-mr3020-v1-squashfs-factory.bin and [piratebox.aod-rpg.de] provided by this tut: [docs.google.com] 3)My home lan ip is: 192.168.1.254...
View ArticleRe: TP-MR3020 Ver 1.4 Issues
Sry, but you forgot to post the content of your /etc/config/network Please post. And as you already mentioned, you have an issue with your network connection, which results into a unfinished/partly...
View ArticleRe: TP-MR3020 Ver 1.4 Issues
Here is the output: cat /etc/config/network config interface 'loopback' option ifname 'lo' option proto 'static' option ipaddr '127.0.0.1' option netmask '255.0.0.0' config interface 'lan' option...
View ArticleRe: TP-MR3020 Ver 1.4 Issues
I started from scratch again went with davids tut: [daviddarts.com] and it worked fine this time. Thanks to everyone for your help, maybe some of this info listed above will help others!
View ArticleRe: Cannot telnet to device?
Alright, never mind my last post. I forgot to mount_root. However, I still cannot ssh into my router. I DO know that my gateway's IP is 10.0.1.1(Airport Extreme). What I DON'T know is what to insert...
View ArticleRe: Cheap console serial port for TL-MR3020
how with TL-WR743ND can inject MIKROTIk? ^_^
View ArticleRe: Buffalo WZR-HP-G300NH2
This is the page you want for the newer device: [wiki.openwrt.org]
View ArticleRe: piratebox on other router
FeloniousMonk Wrote: ------------------------------------------------------- > Hey, I ran across this model for super cheap at a > surplus store and went ahead and picked it up, > hoping it...
View ArticleRe: Cannot telnet to device?
No such luck there, I'm afraid. Are there any common mistakes I should be looking out for? What should I do?!
View ArticleRe: piratebox on other router
It totally does. The reason for it's existence is to plug one of those 3G/4G cellular sticks into it in order to share the connection among several devices.
View ArticleRe: piratebox on other router
thought it was an internal usb only. ok, then go for it ;)
View ArticleRe: X( WARNING TP-Link TL-WR703N v1.7. X(
Hello David, Can you please url point me to the bin that do work OK? .... " 703 v1.7 the current trunk image is confirmed to work." Thank you nissim.zur@gmail.com
View ArticleEndless installation MR3020(ver 1.8)
Hi I am trying to install pb in a MR3020 (ver 1.8). the opkg install piratebox* does not end. I keep getting ......(dots) and installation does not get completed. waited for few hours.... could you...
View ArticleRe: Endless installation MR3020(ver 1.8)
Hi, is you USB FAT32 formatted ? What USB stick are you using? Did you get any errors during installation before the dots started? Can cancel it with CNTRL+C and post the output of dmesg | tail -n 20...
View ArticleRe: piratebox on other router
Matthias, I am running OpenWRT Barrier Breaker on an RT5350 board, it works fine. However, the piratebox install fails for a lot of kernel depenencies (3.7.10-1). One for each of the kmod-nls...
View ArticleRe: piratebox on other router
failing in kernel dependencies results in in using trunk image. Trunk images are not stable, so it can happen if you install today - tomorrow the kernel packages are outdated. :( The only way to...
View ArticleRe: piratebox on other router
I rebuilt the kernel with the piratebox dependencies pre-installed. Still no luck. I'd like to try installing manually, are the source files available instead of an ipk?
View Article