Re: Reset to PirateBox Defaults
As I don't know what exactly you changed, you can do a complete reinstall using The upgrade howto. When you only changed parts in /opt/piratebox you can simple reset that folder with running: cd ~...
View ArticleRe: /mnt/ Permission Denied? MR3040+Sandisk Ultra fit 64GB Formatted Fat 32
As I posted on your other thread.. and answered on the IRC: - USB3.0 may work - Checkout that you have one partition configured in the partition table. The difference is that the USB-Stick appears as...
View ArticleError installing Piratebox
I got Following error while Installing PirateBox on WDR 3600. I followed This link and got the error while installing PirateBox Image Language: PHProot@OpenWrt:~# opkg -d ext install...
View ArticleAuto-install not working MR3040
I'd like to start off by saying I like the work you're doing on this project. I got an early install working on my MR3040, even got through the update towards the end of 2014. The most recent firmware...
View ArticleRe: Auto-install not working MR3040
PS: even after letting it run for over an hour, I cannot find and install log on the flash drive.
View ArticleRe: /mnt/ Permission Denied? MR3040+Sandisk Ultra fit 64GB Formatted Fat 32
Thank you were absolutely right USB 3.0 just didn't work.
View Articleinstall packages from openwrt repository onto pirate box
Followed piratebox installation instructions. All good. Thx. Now I would like to know: How does one add a few packages from the openwrt repository to the piratebox installation? For example, kismet,...
View ArticleRe: Error installing Piratebox
I'm sorry, I cleaned that up. I re-placed the file to the location, just retry that step.
View ArticleRe: Auto-install not working MR3040
your video was removed. when having our image installed, checkout your usb stick is correclty partitioned. to do so, login and then check with the command ls /dev/sd* If you can find /dev/sda1 -. your...
View ArticleRe: install packages from openwrt repository onto pirate box
you need to connect you box to the internet, run the piratebox nodns command; then you can use opkg like normal.
View ArticleRe: Multiple storage devices?
But if someone want to and a usb hub for more storage ???? Is it possible ??
View ArticleRe: MR3020 back to original firmware FAIL HEEEEEELP
please delete this topic i made it.
View ArticleTP Link MR3040 V2 Router Bricked after flashing OpenWRT firmware.
Hi, I am now in serious problem. I flashed openWrt firmware (Here the link of the file I flashed). Then revert back to my original firmware . Then after some days,I flashed again Open WRT firmware and...
View ArticleTL-MR3040 Connection Question
Hi all, So I have what may seem like a stupid question, but here goes. If I connect the TL-MR3040 router to my Macbook via the wifi connection, can the macbook talk to the RJ45 port? I would think...
View ArticlePassword on folder in piratebox mr3020.
For example there is files and folders in share ok but if i want to add password on a folder to access it how i can do this ????
View ArticlePost-Installation not working
I finished installing the software onto my router, but I can't seem to connect via Telnet or type anything when I connect via SSH. When I try to connect to Telnet with "telnet 192.168.1.1" it gives me...
View ArticleRe: Password on folder in piratebox mr3020.
ok i found how to add pass to add files in foldes but to access folders pass ??
View ArticleRe: Multiple storage devices?
maybe it can work out, but I guess the tiny devices do not have enough power to supply two or more usb sticks. In addition you have to do additional steps that the box is not confused from them......
View ArticleRe: Post-Installation not working
please reconnect(disconnect and connect) your ethernet cable, under Windows7 sometimes it doesn't renew the IP fast enough.
View ArticleRe: TL-MR3040 Connection Question
Quote If I connect the TL-MR3040 router to my Macbook via the wifi connection, can the macbook talk to the RJ45 port? yes. Quote I can go out and try to get a crossover cable, You don't need a cross...
View Article