Re: Able to access via Fail Safe however shows Tons of missing files
hi, you are accessing the box in failsafe mode, aren't you? And why? Matthias
View ArticleTP-LINK TL-MR3020 GONE MAD :?
Hello. I recently bought a MR3020 and followed the guide on Piratebox 1.0 It all went fine and worked well. I then decided to look at some of the ways people have edited the start up page. This where...
View ArticleRe: TP-LINK TL-MR3020 GONE MAD :?
If you get it to Failsafe mode you should be able to recover. Check out this thread => [forum.piratebox.cc] especially the last post describes in detail what you have to do. To summarize, get a...
View ArticleRe: TP-LINK TL-MR3020 GONE MAD :?
ok looked at those pages an got a bit confused (joys of Asprgers) have openwrt-ar71xx-generic-tl-mr3020-v1-squashfs-factory.bin on pendrive in the router which is in failsafe mode. Now what do i do....
View ArticleRe: TP-LINK TL-MR3020 GONE MAD :?
You connect to the router via telnet. Once connected you check that you can access the USB Stick ls /mnt/usb/ Now cd to the directory containing the *.bin and write it: cd /mnt/usb mtd write...
View ArticleRe: TP-LINK TL-MR3020 GONE MAD :?
root@(none):/# ls /mnt/usb/ root@(none):/# does this mean try another pendrive root@(none):/# cd /mnt/usb root@(none):/mnt/usb#
View ArticleRe: TP-LINK TL-MR3020 GONE MAD :?
Interesting, could you please run fdisk -l and post the output.
View ArticleRe: TP-LINK TL-MR3020 GONE MAD :?
root@(none):/# fdisk -l /bin/ash: fdisk: not found root@(none):/#
View ArticleRe: TP-LINK TL-MR3020 GONE MAD :?
OK, so that is not available -_- Does mount say anything? I had the impression that the USB stick should be automatically mounted if available at boot up and entering the failsafe mode. You could also...
View ArticleRe: TP-LINK TL-MR3020 GONE MAD :?
root@(none):/# mount rootfs on / type rootfs (rw) /dev/root on /rom/rom type squashfs (ro,relatime) proc on /proc type proc (rw,noatime) sysfs on /sys type sysfs (rw,noatime) tmpfs on /tmp type tmpfs...
View ArticleRe: TP-LINK TL-MR3020 GONE MAD :?
OK, your thumb drive is not mounted. ls /dev/ you can compare the output of this ls with the stick attached and without, the device being added when you plug in the stick is the one you need to mount....
View ArticleRe: TP-LINK TL-MR3020 GONE MAD :?
hmm it now wont ping at all think its lump hammer time. Thank you so much with all the help guys (:P) strangely enough i can get to the piratebox homepage via web browser while its connected via the...
View ArticleRe: TP-LINK TL-MR3020 GONE MAD :?
Hmm, can not be. None of the commands should have changed anything, only the mtd command will overwrite your Firmware. Device should still be pingable and go into Failsafe mode,... Those devices are...
View ArticleRe: TP-LINK TL-MR3020 GONE MAD :?
Could not get a single bit of life out of it at all. Spared its life and carted of to my mates where he worked his soldering magic on it Bring Back To Life Magic And after a few ciders and a bottle of...
View ArticleRe: TP-LINK TL-MR3020 GONE MAD :?
Great to hear. I tell you, those things are nearly unbrickable :-D
View ArticleRe: TP-LINK TL-MR3020 GONE MAD :?
yep love them already. Have a GLiNet Router & two TP-Link MR3020 on the way (:D well they were very cheap on ebay and giving one to my friend for his help and soldering headers on to them all just...
View ArticleHow to fix MR3020 Piratebox?
So just like one year ago I build my piratebox(TL-MR3020) and forgotten about it(general story :) ). Then one day I need the usb of the piratebox(Toshiba-8GB) and eventually formatted it(bad choice I...
View ArticleNoob In Need Of Piratebox Board Assistance
Hello there PirateBox :) So I recently found the piratebox project and was instantly intrigued with it. I immediately set to work collecting the things I'd need to build one. I got it up and running a...
View ArticleRe: Noob In Need Of Piratebox Board Assistance
Navigate to your image board directory in ssh and run the command 'ls -al' without the quotes. Post what it says. Be sure to use the "code -> HTML strict" tag here on the forums to keep the...
View ArticleRe: Noob In Need Of Piratebox Board Assistance
As for the first part of your message, here is what was printed when I navigated to /opt/piratebox/fourmspace and typed ls -al: drwxrwxrwx 2 root root 1024 Jan 27 16:06 . drwxr-xr-x 11 root root 1024...
View Article