Re: Lost on Step #15, opkg update / adding USB support - "can't connect to...
Yes, in the end I'm hoping to get the offlineArt package running. Thanks again for your help, and sorry in advance that I am new to most of this stuff. I changed my ipaddr to 192.168.77.1, but I can...
View ArticleRe: Lost on Step #15, opkg update / adding USB support - "can't connect to...
Hi, at first, you should decide if you want to run offlineArt or PirateBox. If you install PirateBox you can not switch to offlineArt later! You are not wrong what you are writing, sorry I wasn't...
View ArticleRe: Lost on Step #15, opkg update / adding USB support - "can't connect to...
Yes, I plan on installing offlineArt (not pirate box) once I get a ping to work using: [offlineart.net] Now I am wired up as you stated above, from my laptop to the LAN port on the piratebox, and then...
View ArticleRe: Lost on Step #15, opkg update / adding USB support - "can't connect to...
can you please post a short output of the ping command please? Then i need the output of /etc/resolv.conf Matthias
View ArticleRe: Lost on Step #15, opkg update / adding USB support - "can't connect to...
The ping output is here: root@OpenWrt:~# ping google.com ping: bad address 'google.com' /etc/resolv.conf contains the following: search lan nameserver 127.0.0.1
View ArticleRe: Lost on Step #15, opkg update / adding USB support - "can't connect to...
k, that is easy :) The nameresolution is somewho worse. Please edit /etc/resolv.conf and exchange 127.0.0.1 with 8.8.8.8
View ArticleRe: Lost on Step #15, opkg update / adding USB support - "can't connect to...
I'm afraid I'm getting the same ping results even when changed to 8.8.8.8 I also noticed that etc/resolv.conf reverts back to 127.0.0.1 after a reboot, is that a problem? Sorry for all of the...
View ArticleRe: Lost on Step #15, opkg update / adding USB support - "can't connect to...
The most interesting part is, that usually you receive a valid DNS-IP by the wan connection your router get... and that that won't work. 8-) OpenWRT is sometime a b***h. Consider changing always...
View ArticleRe: Lost on Step #15, opkg update / adding USB support - "can't connect to...
Yes, the internet is working from the laptop (and I have tested from another laptop as well with the same results). It seems like I might have something else wrong. Here is the requested info......
View ArticleRe: Lost on Step #15, opkg update / adding USB support - "can't connect to...
can you please join #piratebox on freenode ? I can offer to solve this via a remote session...
View ArticleRe: Lost on Step #15, opkg update / adding USB support - "can't connect to...
We solved that problem during a remote-session. Local ping (the machine) worked. Ping at the routers IP did not. I looked up /etc/config/firewall the wan section has one "REJECT" or something like...
View ArticleRe: MR3020 bricked or am I doing something wrong?
like a say before i flashing in 3g mode. but in failsafe mode no conect. telnet and ssh. i changed ip adress from my computer and nothing happens. in normal use, the eth led always blinking. what...
View ArticleRe: MR3020 bricked or am I doing something wrong?
i know what i do wron, i installed openwrt batman and i cannot connect throw internet. but i dont know how fix it and put a normal openwrt firmware
View ArticleRe: MR3040 / PirateBox USB Storage help!
I am having an issue, I don't even know where it is rooting from, but when following Davids directions, on these steps:Install PirateBox Next you’ll need to install PirateBox on the router. 1. Connect...
View ArticleRe: PirateBox 0.6.3 - Chatbox problem
Matthias Wrote: ------------------------------------------------------- > You can do a "fallback" to the old version (where > data.pso is read), using piratebox.lan/chat.html Still nothing. :(...
View ArticleRe: PirateBox 0.6.3 - Chatbox problem
did u already check the /opt/piratebox/tmp/break.log after u tried piratebox.lan/chat.html ?? There HAVE to be some hint about what it going on...
View ArticleRe: MR3040 / PirateBox USB Storage help!
If you can't get past /etc/init.d/piratebox: Mounting external USB storage... The problem is your USB Stick. Which one do u have? The MR3040 is very sensible about that. It should not be a USB1.0...
View ArticleRe: TP-Link MR3040 Installation Trials and Tribulations
Matthias, after trying to install the version from "[downloads.openwrt.org]; After the reboot, my device seems bricked. I cannot see the piratebox share freely, though if I lan connect to the 3040, it...
View ArticleRe: MR3040 / PirateBox USB Storage help!
Awesome advice (I knew it ws something small I was overlooking, and this actually seems to be exactly that, thank you! I am going to pick one up tomorrow, a mini, with no LED, I think, along with the...
View ArticleRe: MR3040 / PirateBox USB Storage help!
As already suggested in my PM. I believe, you don't need special device for debricking. Usually booting in failsafe mode is enough. Youtube: [www.youtube.com] And instead of pushing a button, you need...
View Article