Re: MR3020 reboots if DLNA is enabled
Not yet, my focus was working on better RPi images during the last days. It is still on my list. I'll add it to our issue list, to keep track of it. (I'm currently working with github issues to...
View ArticleRe: TL MR 3020 Bricked?
Quotehttp://piratebox.cc/openwrt:troubleshootingI removed all the files from my USB stick and I'm not able to connect anymore. Is it bricked? Don't panik. If you only removed the files on the USB...
View ArticleRe: Need Help - After changing ip adress cant connect to the piratebox
rcu, which howto did you follow for changing the IP? Did you change piratebox.conf as well? If you only changed the network-configuration, the dnsmasq (DHCP-Server) doesn't find a valid configuration...
View ArticleRe: Help required for the MR3020
why do you want to reinstall the piratebox? Do you have any issues? Do you want to install a plain OpenWrt? We need a bit more information to give you the right advice.. what steps might be possible...
View ArticleRe: Move from LibaryBox to PirateBox
Hi, you have a very particular issue. The reboot loop should be solved in the next generation of images. The indication is that couple of lines: Quote an 1 00:03:42 OpenWrt user.notice root:...
View ArticleRe: MR3020 reboots if DLNA is enabled
Hi, I did some investigation and I managed to get it working in my file constellation. Reduce the minidlna load on bootup: uci set minidlna.config.log_dir=/opt/piratebox/minidlna/log uci set...
View ArticleRe: Need Help - After changing ip adress cant connect to the piratebox
I followed this tutorial http://piratebox.cc/openwrt:diy . After i reloaded the network i rebooted the box but as soon as i change the ip it doesnt work anymore. In my network config i change it to :...
View ArticleRe: Need Help - After changing ip adress cant connect to the piratebox
Next thing is : when i try to update opkg it says 404 files cant be found ( connection to internet is on). Thanks
View ArticleRe: Need Help - After changing ip adress cant connect to the piratebox
I did figure out what the problem was : i actually had some trouble with my router . Now everything is fine i installed php . But one last thing i changed my index html to index php and my browser...
View ArticleRe: MR3020 reboots if DLNA is enabled
Sir Matthias, Thank you for all your effort. I'll still try this on my box. (tu):) Snipy
View ArticleRe: Need Help - After changing ip adress cant connect to the piratebox
Hi, I'm glad your Box is now working! I assumptions above with the NET= config-line are correct. Can you post how your lighttpd.conf looks alike, then I can say what you have to adjust. Matthias
View ArticleI think I may have bricked my mr-3040....
So I set up my Pirate box on a TP-Link mr-3040, this morning I was having problems with the form, It gave a software error. After looking into the error I finally gave up and decided I wanted to...
View ArticleRe: I think I may have bricked my mr-3040....
>> It gave a software error. which one? The issue you have is, that you box is now not consistent with the files on the usb stick anymore. You need to reflash the device and start from the...
View ArticleRe: I think I may have bricked my mr-3040....
I looked under the trouble shooting tab for the instructions to put it into safe mode but they are only for the 3020. How do I put my 3040 into safe mode?
View ArticleRe: Help required for the MR3020
I know this may seem sort of a hijack but I have just set mine up and can relate. Have you tried plugging it into a computer with an Ethernet port again? I'm not sure this is how it's supposed to work...
View ArticleRe: I think I may have bricked my mr-3040....
You do it the same way. The 3020 and 3040 are very similar. It is mainly the shape and the battery that differ.
View ArticleRe: I think I may have bricked my mr-3040....
Dont I have to have the WPS button? The 3040 doesn't have one (or at least from what I have seen)
View ArticleRe: I think I may have bricked my mr-3040....
Try the procedure, without pressing the button. It just might work for you...
View ArticleRe: I think I may have bricked my mr-3040....
You don't have a WPS button, but there is the "reset" button on the top of device! Unfortunately the MR3040 gives no light indication if it is already in failsafe mode or not. - Just try to push...
View ArticleRe: having some install issues on 3020
Big thanks guys, it seems to be up and running now :)-D
View Article