I've renamed this thread to keep track of issues I'm facing during installation.
Install Steps completed
1. Device was at 192.168.0.1 , logged in as admin/admin
2. System Tools -> Firmware Upgrade -> browse for bin
3. Install attitude adjustment firmware
.bin file : use the Attitude Adjustment .bin file athttp://downloads.openwrt.org/attitude_adjustment/12.09-rc1/ar71xx/generic/openwrt-ar71xx-generic-tl-mr3040-v1-squashfs-factory.bin
4. login, set passwd and then login via ssh root@192.168.1.1
5. Changed IP address of router from 192.168.1.0 to 192.168.1.2 due to how it was being interpretted in the /etc/config/network file.
Current Obstacle/Step
Error when running opkg install kmod-usb-uhci (scroll down to last post for details)
Docs I'm using
http://www.disk91.com/2012/technology/systems/installation-of-a-piratebox-on-t-link-mr3040/
http://daviddarts.com/piratebox-diy-openwrt/?title=PirateBox_DIY_OpenWrt
![]()
Install Steps completed
1. Device was at 192.168.0.1 , logged in as admin/admin
2. System Tools -> Firmware Upgrade -> browse for bin
3. Install attitude adjustment firmware
.bin file : use the Attitude Adjustment .bin file athttp://downloads.openwrt.org/attitude_adjustment/12.09-rc1/ar71xx/generic/openwrt-ar71xx-generic-tl-mr3040-v1-squashfs-factory.bin
4. login, set passwd and then login via ssh root@192.168.1.1
5. Changed IP address of router from 192.168.1.0 to 192.168.1.2 due to how it was being interpretted in the /etc/config/network file.
Current Obstacle/Step
Error when running opkg install kmod-usb-uhci (scroll down to last post for details)
Docs I'm using
http://www.disk91.com/2012/technology/systems/installation-of-a-piratebox-on-t-link-mr3040/
http://daviddarts.com/piratebox-diy-openwrt/?title=PirateBox_DIY_OpenWrt
