Re: **Total Noob** MR3420
oh, that was not good. If you have some other devices beside MR3020, MR3040 oder WR703N you should not copy the network configuration 1:1 If a device has a seperate WAN port, the easiest way is: 1....
View ArticleRe: **Total Noob** MR3420
I kinda figured something wasn't good. lol ok, but my problem is after i did the network edit .. i can no longer connect to Openwrt, telnet, or ssh
View ArticleRe: Can't connect to PirateBox
Matthias Wrote: ------------------------------------------------------- > If your IP is 192.168.178.111 and you set your > Box to 192.168.2.x you should change your > computer's ip to...
View ArticleRe: Can't connect to PirateBox
Everything works fine. :) I have only one question left. How can I connect to the piratebox when the piratesever ist installed?
View ArticleRe: **Total Noob** MR3420
I finally was able to do a rest and re-flash it. But when i try to install piratebox i get a few errors in the system log. I would copy and paste them here if i was able to to copy from putty but...
View ArticleRe: **Total Noob** MR3420
simply drag with your mouse-cursor over the putty window. Then the marked text is in your clipboard.. and paste it somewhere. The error-messages are important to get an idea what's up.. Error-Messages...
View ArticleRe: **Total Noob** MR3420
ok it didn't go as far as it did last time. meaning it didn't finish the whole install due to error so i did not proceed with the kareha installation but here is the system log of how far it did get...
View ArticleRe: **Total Noob** MR3420
and here is round 2: root@OpenWrt:/tmp# root@OpenWrt:/tmp# /etc/init.d/piratebox: Mounting external U SB storage... -ash: root@OpenWrt:/tmp#: not found root@OpenWrt:/tmp# -ash: /etc/init.d/piratebox::...
View ArticleRe: **Total Noob** MR3420
don't copy and paste the complete output again into your console.. that does not work! You get a "bus error", can you please post the output of: dmesg | tail -n 30 Thanks
View ArticleRe: **Total Noob** MR3420
ok what exactly am i suppose to paste in the console? (had to reset in order to access ssh) dmesg | tail -n 30 results: root@OpenWrt:~# dmesg | tail -n 30 [ 38.220000] usbcore: registered new...
View ArticleRe: **Total Noob** MR3420
I need the dmsg message right after the "Bus error" apeared.... (no reboot between)
View ArticleRe: **Total Noob** MR3420
**UPDATE** I just tried to do the install again this time i was able to do the dmesg |tail n30 without reseting the router I did not get the "bus error: again this time i got: root@OpenWrt:~# cd /tmp...
View ArticleRe: **Total Noob** MR3420
Segmentation fault and Bus Error are both OS-errors. There are two possibilities: you are using a buggy OpenWRT version, or your hardware has a defect. I can't say what it is... maybe ask in OpenWRT...
View ArticleRe: **Total Noob** MR3420
Hmmm, ok. What do you suggest from here? Purchasing a different router?
View ArticleRe: www_alt
I have the same problem too. If it cannot be used for landing site so actually what is www_alt folder for ? What is the advantage using www_alt instead of the original www ? Many thanks for you.
View ArticleRe: www_alt
Sure you can use it for the landing page, but it is limited. It is for those people, who want to install big php websites or want to do alot of things for their own.
View ArticleClik here to view.
TP-Link MR3040 Installation Trials and Tribulations
I've renamed this thread to keep track of issues I'm facing during installation. Install Steps completed 1. Device was at 192.168.0.1 , logged in as admin/admin 2. System Tools -> Firmware Upgrade...
View ArticleRe: TP-Link MR3040 Questions
I found the answer. The MR3040 uses the firmware at this location http://downloads.openwrt.org/snapshots/trunk/ar71xx/openwrt-ar71xx-generic-tl-mr3040-v1-squashfs-factory.bin
View Article