Nothing, I change nothing
This is what I try since 10 days:
-Use tftp.exe to upload "recovery" firmware (it's openwrt "standard")
-When my MR3020 is ok, I put original firmware from TP-link
At this point I'm like if my MR3020 is brand new...
After that, download openwrt and install file from [stable.openwrt.piratebox.de]
put them on a formated USB stick (fat32)
unzip install.zip to have install folder on my key.
Put the usb key into MR3020
Pull the switch to 3G/4G
Go into TP-Link mr3020 config website.
Go to firmware_upgrade step
And use openwrt download from [stable.openwrt.piratebox.de]
I let MR3020 working for 30 or 40 minutes and after several reboot, I can use piratebox with ethernet cable but there is no wifi.
I try to shutdown MR3020 and start it without ethernet, made the same...
I tries this several time and always make it the same
This is what I try since 10 days:
-Use tftp.exe to upload "recovery" firmware (it's openwrt "standard")
-When my MR3020 is ok, I put original firmware from TP-link
At this point I'm like if my MR3020 is brand new...
After that, download openwrt and install file from [stable.openwrt.piratebox.de]
put them on a formated USB stick (fat32)
unzip install.zip to have install folder on my key.
Put the usb key into MR3020
Pull the switch to 3G/4G
Go into TP-Link mr3020 config website.
Go to firmware_upgrade step
And use openwrt download from [stable.openwrt.piratebox.de]
I let MR3020 working for 30 or 40 minutes and after several reboot, I can use piratebox with ethernet cable but there is no wifi.
I try to shutdown MR3020 and start it without ethernet, made the same...
I tries this several time and always make it the same