Re: MR-3040 Unknown IP Address
Hi Matthias, I just did what you wrote and the video. But it did not work :( Still there is no telnet or ssh connection.
View ArticleRe: can not connet to wdr3600 via ethernet
Hello, Thanks for your reply... In fact, Unfurtunatly I can not connect to the device via ethernet or any thing else, so now , I don't have any connection to test it via ping or telnet! and about the...
View ArticleRe: can not connet to wdr3600 via ethernet
Hi, I don't understand, because your write "I can not connect to the device via ethernet " and then "I connected the cable to router, the LAN LED will be on". so you connected to the router. Did you...
View ArticleRe: MR-3040 Unknown IP Address
assuming all the wirering is correct and the pushing the reset button correctly... then it maybe really is a brick (which might be recoverable using serial access). Do any other lights come up after...
View ArticleRe: MR-3040 Unknown IP Address
Only power, wired connection and wifi lights come up. And also this is my terminal outputs: seniorokur@dell-Inspiron-5521:~$ sudo ifconfig eth0 192.168.1.2 [sudo] password for seniorokur:...
View ArticleRe: Piratebox fail auto install on MR3020
I've got this kind of message after install : nl80211 driver initialization failed. hostapd_free_hapd_data: Interface wlan0 wasn't started Failed to start hostapd for phy0 I try several things, but...
View ArticleRe: MR-3040 Unknown IP Address
what me confuses is, that it is the wrong error message. Can you post me the output of the following command please: sudo ifconfig eth0 192.168.1.2 sudo ifconfig eth0 Just to check if the interface is...
View ArticleRe: Piratebox fail auto install on MR3020
can you please post the output of the following commands: [www.piratebox.cc]
View ArticleRe: MR-3040 Unknown IP Address
Here is the output message: seniorokur@dell-Inspiron-5521:~$ sudo ifconfig eth0 192.168.1.2 [sudo] password for seniorokur: seniorokur@dell-Inspiron-5521:~$ sudo ifconfig eth0 eth0 Link encap:Ethernet...
View ArticleRe: Piratebox fail auto install on MR3020
mount: rootfs on / type rootfs (rw) /dev/root on /rom type squashfs (ro,relatime) proc on /proc type proc (rw,noatime) sysfs on /sys type sysfs (rw,noatime) tmpfs on /tmp type tmpfs...
View Articlesemi bricked mr 3040
my piratebox install on my tp link mr 3040 is semi bricked i used the flash drive for a linux install and i deleted the backup of the flash drive. i can still connect but the webpage doesn't show up...
View ArticleRe: can not connet to wdr3600 via ethernet
Hi, I mean, I have connected the ethernet cable to my pc and the router, the LAN LED of the router is on, but I didn't see any connection in my computer(I'm working in ubuntu),in fact after a while...
View ArticleRe: MR-3040 Unknown IP Address
While you are testing this, are you connected with your home network having the same ip range (192.168.1.x) ?
View ArticleRe: Piratebox fail auto install on MR3020
Hi, I don't understand this error messages, because everything looks like it should be. Where do you receive this message? Did you change something in piratebox.conf? Matthias
View ArticleRe: semi bricked mr 3040
Hi, you can find a hint here, that might help: [www.piratebox.cc] Matthias
View ArticleRe: semi bricked mr 3040
Thanks Matthias i was able to re flash with a USB and i plan to update to the latest version of pirate box.
View ArticleRe: Piratebox fail auto install on MR3020
Nothing, I change nothing This is what I try since 10 days: -Use tftp.exe to upload "recovery" firmware (it's openwrt "standard") -When my MR3020 is ok, I put original firmware from TP-link At this...
View Article