Hi Eano,
thanks for posting this.
According to this output
Now, it is needed to figure out, what happens during boot/startup, that it seems the Box can't mount the partitions. Unfortunately you forgot that command
I need that output and the result from the start/stop command executed on your piratebox
regards Matthias
thanks for posting this.
According to this output
root@piratebox:~# ps PID USER VSZ STAT COMMAND 1 root 1504 S init 2 root 0 SW [kthreadd] 3 root 0 SW [ksoftirqd/0] 5 root 0 SW [kworker/u:0] 6 root 0 SW< [khelper] 63 root 0 SW [sync_supers] 65 root 0 SW [bdi-default] 67 root 0 SW< [kblockd] 96 root 0 SW [kswapd0] 144 root 0 SW [fsnotify_mark] 173 root 0 SW< [ath79-spi] 184 root 0 SW [mtdblock0] 189 root 0 SW [mtdblock1] 194 root 0 SW [mtdblock2] 199 root 0 SW [mtdblock3] 204 root 0 SW [mtdblock4] 209 root 0 SW [mtdblock5] 250 root 0 SW [kworker/0:1] 442 root 0 SWN [jffs2_gcd_mtd3] 472 root 0 SW [khubd] 481 root 0 SW [scsi_eh_0] 482 root 0 SW [usb-storage] 483 root 0 SW [kworker/0:2] 484 root 0 SW [kworker/u:2] 508 root 1504 S init 542 root 0 SW< [cfg80211] 617 root 0 SW< [bat_events] 644 root 1508 S /sbin/syslogd -C16 646 root 1488 S /sbin/klogd 648 root 872 S /sbin/hotplug2 --override --persistent --set-ru 656 root 872 S /sbin/ubusd 731 root 0 SW< [loop0] 736 root 0 SW [jbd2/loop0-8] 737 root 0 SW< [ext4-dio-unwrit] 758 root 0 SW< [loop1] 763 root 0 SW [jbd2/loop1-8] 764 root 0 SW< [ext4-dio-unwrit] 771 root 1468 S /sbin/netifd 968 root 0 SW [flush-8:0] 971 root 0 SW [flush-7:1] 1234 root 1640 S hostapd -P /var/run/wifi-phy0.pid -B /var/run/h 1354 root 1500 S /sbin/watchdog -t 5 /dev/watchdog 1466 root 1512 S /usr/sbin/crond -c /etc/crontabs -l 5 1477 root 1152 S /usr/sbin/dropbear -P /var/run/dropbear.1.pid - 1508 root 1500 S /usr/sbin/ntpd -n -p 0.openwrt.pool.ntp.org -p 1545 root 1216 S /usr/sbin/dropbear -P /var/run/dropbear.1.pid - 1546 root 1504 S -ash 1580 root 1496 R psYour device won't get an valid IP Address, even if you told me so on IRC :(
Now, it is needed to figure out, what happens during boot/startup, that it seems the Box can't mount the partitions. Unfortunately you forgot that command
mount.
I need that output and the result from the start/stop command executed on your piratebox
/etc/init.d/piratebox restart
regards Matthias