Re: Installing PirateBox on Netgear WNR3500L
Hi, ok, that looks not that bad. I'm adjusting the post above and my other page based upon your feedback. wget: server returned error: HTTP/1.1 500 Internal Server Error This is the reason why the...
View ArticleRe: Installing PirateBox on Netgear WNR3500L
The date is set and minidlna is installed. But I don't know how to reproduce the error using the wget command because I don't know the adress to wget... (because the script installing the package...
View ArticleRe: Installing PirateBox on Netgear WNR3500L
Good that the other two points are solved now. As the break.log and the error.log is only about 2 or 3 lines, you can post it here. the wget command can be reproduced with pointing your browser to...
View ArticleRe: Installing PirateBox on Netgear WNR3500L
Break.log was empty and Error.log contain 2 line written during the boot (I think) : 2015-02-09 12:33:24: (log.c.164) server started 2015-02-09 12:33:24: (server.c.1045) WARNING: unknown config-key:...
View ArticleRe: Installing PirateBox on Netgear WNR3500L
can you please post the output of: perl -v opkg list-installed I wonder what the reason is that perl is not there.
View ArticleRe: Installing PirateBox on Netgear WNR3500L
perl -v -> perl: not found opkg list-installed -> perl - 5.20.0-6 PS : complet output in PM.
View ArticleRe: Installing PirateBox on Netgear WNR3500L
mh, strage. can you please try to reinstall perl, just in the case something went horribly wrong ;) opkg install --force-reinstall perl And then test perl -v If it still is not found please try to run...
View ArticleRe: Installing PirateBox on Netgear WNR3500L
perl -v is now working. I check to point the browser to kareha.pl and same issue "500 - Internal Server Error" but there was 2 new line in the break.log : Can't locate if.pm in @INC (you may need to...
View ArticleRe: Installing PirateBox on Netgear WNR3500L
weired, let's reinstall all perl packages... opkg install --force-reinstall perl perlbase-base perlbase-cgi perlbase-essential perlbase-file perlbase-bytes perlbase-config perlbase-data...
View ArticleRe: Installing PirateBox on Netgear WNR3500L
Hi Matthias, After the reinstalation of all perl packages the errors line still the same, so I do : opkg install perlbase-if And It's worked, I have the forum now (:P) Thank you very very much (tu) PS...
View ArticleRe: Installing PirateBox on Netgear WNR3500L
b) What happens if the USB Stick is dead? No, it is no brick-risk. The device would boot normaly (taking a bit longer) and you have it close to factory settings again. You start over at that point:...
View ArticleRe: Bricked MR3040
Hello matthias! I am having the same problem.. Just bricked my mr3040. Turned it off while flashing.. (Not good huh??) i have a usb / com port, but it is not a 3.3 v adapter. It runs on 5 volts.. Is...
View ArticleRe: Bricked MR3040
As the USB-TTL adapter arent that expensive, I would buy one with 3,3V regards Matthias
View ArticleRe: Trouble Setting Up Piratebox on TL-WR1043ND ver 2.1
Hi, I'm stuck. I followed the instructions here (http://www.piratebox.cc/openwrt:diy), although this seems to be for the wrong router. I can't really even get started. I can't log into the router from...
View ArticleMaStr-- told me to post this
Here is the information you asked for: [pastebin.com] Install log: [pastebin.com] To help you remember my problem: 1) I took away the powercable from my MR3020 and connected it to another PC so I...
View ArticleNeed help with MR3040 install
Got stuck on post-installation step 4, don't understand what to do, please help QAQ
View ArticleRe: MaStr-- told me to post this
Hi Eano, thanks for posting this. According to this output root@piratebox:~# ps PID USER VSZ STAT COMMAND 1 root 1504 S init 2 root 0 SW [kthreadd] 3 root 0 SW [ksoftirqd/0] 5 root 0 SW [kworker/u:0]...
View ArticleRe: Need help with MR3040 install
You need to adjust the configuration file with setting up your own password&secret key (for encrypting data) running the command vi /opt/piratebox/www/board/config.pl This is needed to make the...
View ArticleRe: Need help with MR3040 install
Sorry I really don't understand, Once I enter that I see only see a bunch of ~'s one after another. I can provide screenshots if needed, and I don't understand how to use the vi cheat sheet.
View ArticleRe: Need help with MR3040 install
Do you see a PirateBox wifi signal? if you only see a bunch of ~ , then something else is wrong.... can you provide that output for the command you find here: [www.piratebox.cc]
View Article