Re: Unbrick a TP-WR1043ND v2

Hi :)
To begin I would like to thank every one who try to help me, It's very pleasant :)
I'm sorry for this period of silence, I got a head full of shit about this brick..


After many days i try this :

- I try other data rate but nothing change
- I try to connect only the Tx cable to the Rx pin but i can't read what i whrote
- I try another adapter (FT232RL) but nothing change


So i decided to resolder all the pin (Tx, Rx, Gnd)

And That's the solution !

The Wiki about the V2 is right, when i connect like it's explain on, i have the good message and i can stop the reboot with tpl.

Now when i try to send the firmware.bin with :

setenv ipaddr 192.168.0.3
setenv serverip 192.168.0.5
erase 0x9f020000 +0x7c0000
tftp 0x80060000 firmware.bin


i have a message like this:

Try to..
T T T T T T T T T T

eth0: link down

Configuration:

I'm using TFTPD64, he is authorize in my firewall
My Ip adress is 192.168.0.5
The TFTPD64 is configure with this Ip
The firmware.bin is on the good folder
and the Router is connect with the LAN cable to my computer

If someone have an idea, it's will be very kind :)