Ok
Looking at the board with Ethernet plug top left and on off switch at bottom, I have 4 cables in. And the battery.
Reading the cables right to left (p1) red, green, yellow, black
3 Cables in USB adapter
Black is gnd
Rx is yellow
Tx is green
Power is on with one green light.
LAN set to 192.168.1.2 (tftpd sees LAN)
Driver is set to com6 so is serial setting. On. Putty. With 115200, 8bit,1stop, none parity, none flow control
Looking at the board with Ethernet plug top left and on off switch at bottom, I have 4 cables in. And the battery.
Reading the cables right to left (p1) red, green, yellow, black
3 Cables in USB adapter
Black is gnd
Rx is yellow
Tx is green
Power is on with one green light.
LAN set to 192.168.1.2 (tftpd sees LAN)
Driver is set to com6 so is serial setting. On. Putty. With 115200, 8bit,1stop, none parity, none flow control