Re: Noob In Need Of Piratebox Board Assistance
did you run the script to setup the board password?
View ArticleClik here to view.
For Those who have Bricked their Zsun
I found a python tool that allowed me to upload a sysupgrade.bin over serial that I forked here. You will need a 3.3v FTDI to USB cable. I used a variant of this one. I performed the upload from my...
View ArticleRe: Protect with password?
What about for Raspberry Pi2? I tried the same process for the RBP and cannot configure a password for the wireless network. Thanks in advance.
View ArticleRe: Protect with password?
Tommy Wrote: ------------------------------------------------------- > What about for Raspberry Pi2? I tried the same > process for the RBP and cannot configure a > password for the wireless...
View ArticleRe: Bricked MR3040
Well, after having flashed my mr3040 back to original firmware, then to openwrt, I decided to flash to original and then piratebox again. Everything seemed to go fine until piratebox setup. First,...
View ArticleRe: Protect with password?
Yeah i have been trying to do this on an RPi 3, and it doesn't seem to work... i did use this: [piratebox.cc] to change the ssid, but the wpa settings messed up the wifi AP. any one have any ideas?
View ArticleRe: Problem with mr3020 ssh
So... i figured out what i was doing wrong I wasnt using infinite ping... that why i couldnt connect using telnet, my mistake Everything is working fine now :) Again, thanks Matthias
View ArticleRe: PirateBox Password Issue, Help Requested.
Sir what shoud i put to login section. what should i put on username and password? after i write the piratebox image on my sd card. when i run rasp on putty the system need username and password what...
View ArticleSSH Ok, wifi ok but error on page access
Hi all, Here is my problem. I have been playing around with the lighttpd conf file in : /opt/piratebox/conf/lighttpd As I got a problem I put back the original file. But the problem is still there....
View ArticleRe: Bricked MR3040
I am facing same problem. The LEDs are going on and off continuously. After I connect my TL MR3040v1 via serial port it is sending strange characters. No U Boot access. I have double checked the...
View ArticleRe: Protect with password?
Please do not post RPi Questions inside the OpenWrt section. /closing
View ArticleRe: PirateBox Password Issue, Help Requested.
Don't ask RPi stuff inside the OpenWrt section /closing
View ArticleRe: SSH Ok, wifi ok but error on page access
Hey, sounds like an lighttpd issue. Checkout /opt/piratebox/tmp/error.log and /opt/piratebox/tmp/break.log Those files contain indication whats wrong with lighttpd. If that still does not help, try to...
View ArticleRe: Bricked MR3040
Sounds like you bricked the device with flashing back the original firmware. Try to recover the device using ethernet cable and serial access. Then reflash using TFTP
View ArticleRe: Bricked MR3040
> Aishik and that sound like you broke your uboot... then it is bricked
View Articleremoving piratebox and restoring device to factory.
As the title says. I would like to restore my device back to factory. I am using Gl.iNet Smart Router. Easy to install piratebox but no clear way of removing it.
View ArticleRe: removing piratebox and restoring device to factory.
I was able to restore my device using this link [www.gl-inet.com] Make sure you download the firmware corresponding to your device. Mods you can close this thread.
View ArticleCan only access piratebox from manually typing 192.168.1.1 or example.com
When upgrading the firmware I had started the installation over wifi to the 3040 thinking I was on ethernet. I then plugged it in to Ethernet on another computer and it seemed to continue and finish...
View ArticleRe: Can only access piratebox from manually typing 192.168.1.1 or example.com
Hi, exactly, we can not intervent HTTPS traffic for several reasons :-( best regards Matthias
View ArticleRe: Bricked MR3040
Hi Matthias, Almost a year ago i bricked my TP-Link TL MR3040. Do you still offer a debrick service? I live in the netherlands. What does it cost to restore the modem to its original firmware?
View Article