MR3020 - Unable to connect to wget: bad address & no FTP
I have noticed a lot of problems with the MR3020 but have been unable to find a fix for the problem I'm having. I am using a SanDisk Cruize Facet 8GB formatted in Linux. When I run box_init_setup.sh...
View ArticleZsun can't connect to wwan and is not broadcasting its ssid
Having carefully followed your instructions for configuring PirateBox on my Openwrt-running Zsun device, I am now locked out of the device. It happened after running the following configuration line...
View ArticleRe: For Those who have Bricked their Zsun
how did you manage to connect to such tiny pads?
View ArticleRe: Zsun can't connect to wwan and is not broadcasting its ssid
Of course, whatever caused this in the first place, the only way to gain back access to the device is through a wired connexion. But the pads on the board are so tiny... Fortunately, the case is very...
View ArticleHelp installing piratebox 1.1 on tplink mr3020
When I installed piratebox 1.1 I have not found the /opt directory. I followed the guide at: [piratebox.cc]. However, when I connected the USB flash drive into the router with the "install" directory...
View ArticleRe: Help installing piratebox 1.1 on tplink mr3020
I typed <sed -i 's; sda1; SDA;' /etc/ext.config> and then I typed <reboot & exit> and re-typed </bin/box_installer_start.sh>. The piratebox was partially installed, but the...
View ArticleRe: need help. TP-Link MR3020
Hi, yes, the USB stick needs to be FAT32 best regards Matthias
View ArticleRe: PirateBox and TL-MR3040
Solved in IRC. Issue was a flashed wrongly firmware. Advised to use auto_flash firmware: [forum.piratebox.cc] Sorry for the late response, Best regards Matthias
View ArticleRe: forgot to plug in my usb
iceflower Wrote: ------------------------------------------------------- > You left out the step "2. Kareha Image and > Discussion Board" (see here). 100% correct! (tu)
View ArticleRe: MR3020 Not Redirecting to PirateBox Homepage
Hi, did you use the OpenWrt image from our website? We have customized it.. but according to the posted output, it looks pretty close... please give me the output of the following commands: cat...
View ArticleRe: MR3020 - Unable to connect to wget: bad address & no FTP
> I'm hoping this problem is as simple as "you didn't format correctly" or > "you need to enable the networking". Yes, it is: It seems your USB stick is formatted with GPT (new partition table...
View ArticleRe: Help installing piratebox 1.1 on tplink mr3020
You have two options: 1) debug the issue with posting the [piratebox.cc] 2) Try reflashing and start over with: [forum.piratebox.cc] best regards Matthias
View ArticleRe: PirateBox and TL-MR3040
Thank very much to Matthias for solving, auto_flash is good for this issue.
View ArticleRe: How to fix PirateBox release 1.1.1 quick update broken devices
So after I use the auto_flash feature and get everything up and running, should I delete the auto_flash folder to save space and prevent reflashing every time?
View ArticleRe: Zsun can't connect to wwan and is not broadcasting its ssid
No it doesn't. I am in the process of building some kind of adapter to be able to connect to the console port without having to solder connections directly on the pcb. If all goes well, once I'm in,...
View ArticleRe: MR3020 - Unable to connect to wget: bad address & no FTP
I didn't even notice it on Disk Utilities! Thanks so much for solving that weekend log headache. (tu)
View ArticleRe: How to fix PirateBox release 1.1.1 quick update broken devices
the files in auto_flash are renamed to prevent reflashing in a loop. You can remove the folder.
View ArticleRe: Zsun can't connect to wwan and is not broadcasting its ssid
Have you tried to boot it in failsafe mode? As far as I can remember, there is an additional script which may open up a hotspot on failsafe mode to regain access.
View Article