Re: Piratebox auto installer trouble MR3020
Tested LibraryBox 2.1 auto-install, also working well on this new firmware. Minor correction from my above post: failsafe mode does not cause factory reset on the rebuilt image prior to install, I had...
View ArticleRe: Unbrick a TP-WR1043ND v2
Hi You need to resolder all the pin (TX, RX, Gnd) [wiki.openwrt.org] to send the firmware.bin with : setenv ipaddr 192.168.1.111 setenv serverip 192.168.1.100 erase 0x9f020000 +0x7c0000 tftp...
View ArticleRe: Piratebox auto installer trouble MR3020
Jeremy, Thank you so much for supporting me to deliver that patch. I'll change piratebox.cc asap. Without your support, that bugfix hasn't made it (tu) (tu) (tu) (tu) (tu)
View ArticleRe: Piratebox auto installer trouble MR3020
Glad I could help, not everyone has the hardware to recover a bricked device so at the very least we've made life a bit easier for those like me who decided to flash it without first doing a little...
View ArticleRe: Minidlna won’t broadcast all the files that are supposed to be shared
Hi, you do not need an username/password to get access to the files. I think the issue is a result of the size of the video. In the past, I encountered a crashed parse/search process of minidlna...
View ArticleRe: Bricked MR3040
So, I have an issue. When I turn it on I get the typical 1 light on 3 flashing. So I've been trying to get the serial connection for a while now with no luck nothing ever shows up in putty. I did do...
View ArticleDisable Shoutbox and Upload Option
Hello everybody, I am a teacher and using the piratebox (MR3020) for my students. Students could be quite creative using shoutbox and upload function. Therefore I want to disable both. Of course the...
View ArticleRe: Disable Shoutbox and Upload Option
Hi Jens, If you want to use PirateBox more for distributing files, you might want to have a look at LibraryBox. It is a bit easier to manage, without an imageboard nor enabled upload. best regards...
View ArticleHelp TP- Link MR3020 got bricked during installation
My TP-Link MR3020 got bricked during installation of firmware. Now i am unable to debrick it in failsafe mode (the LED light of wps/reset button is on, but it is not blinking at all by...
View ArticleRe: Help TP- Link MR3020 got bricked during installation
Did you try to connect to the device using a static IP? If so, maybe you got an MR3020(UN) and used an old image. You might want to try this method for recovering:Recover via serial console best...
View ArticleUpgrade customized Openwrt to last stable version(15.05.1) from 12.09.2
Is it possible? how?
View ArticleRe: Upgrade customized Openwrt to last stable version(15.05.1) from 12.09.2
no, not possible. It will break a lot. Even a fresh installation will not work, because of some major changes in 12++ I am working on supporting the newer versions... but still takes some time to...
View ArticleMR3020(UN) -- mount_root & firstboot...
Hi, apparently I did a revert back to OpenWrt MR3020(UN) in failsafe mode, I ran these commands: mount_root ## this remounts your partitions from read-only to read/write mode firstboot ## This will...
View ArticleRe: MR3020(UN) -- mount_root & firstboot...
After this steps, you can simply copy over a fresh install folder to the USB stick. After powering the device the automatic installation will do the rest.
View ArticleRe: MR3020(UN) -- mount_root & firstboot...
:( It's not working for me, the usb doesn't have any files except the auto_flash folder with the stable.openwrt.piratebox.de and the PirateBox install folder. Any ideas as to how can I restore or...
View ArticleRe: MR3020(UN) -- mount_root & firstboot...
mh, strange. Can you post the output of the commands listed here ,please? Thank you, best regards Matthias
View ArticleRe: MR3020(UN) -- mount_root & firstboot...
root@(none):/# mount rootfs on / type rootfs (rw) /dev/root on / type squashfs (ro,relatime) proc on /proc type proc (rw,noatime) sysfs on /sys type sysfs (rw,noatime) tmpfs on /tmp type tmpfs...
View ArticleGroundhog Day ?
Since days I am trapped: I am doing the very same again and again: - Prepare an USB Stick with auto_flash and install_piratebox - Power on the MR3020 with OpenWrt - Wait for an hour or more - Telnet...
View ArticleRe: MR3020(UN) -- mount_root & firstboot...
It seems your USB stick is not recognized during boot. Is your device powered sufficiently ? If the auto flash feature does not work, you can still follow this path [piratebox.cc] best regards Matthias
View ArticleRe: Piratebox auto installer trouble MR3020
So that means we can now install Piratebox with a fresh TL-MR3020(UN) using [piratebox.cc] and for our bricked TL-MR3020(UN) we have to go through [blog.khairulazam.net] ? Is that correct ? Thank you
View Article