Re: I forgot my password Piratebox.
Could you please give more specific instructions for what to do. I had everything set up, but then my password stopped working. I decided to start over and reformatted my USB drive, but now I can't...
View ArticleRe: I forgot my password Piratebox.
Hi, if you want to start over, did you tried this method: reinstall with autoflash best regards Matthias
View ArticleRe: I forgot my password Piratebox.
Hi, Thanks for the reply. I am not sure how to do step 6 - "Copy the corresponding image to your device". Thanks again.
View ArticleRe: I forgot my password Piratebox.
I figured out what step 6 meant. I got it working! Thanks again!
View ArticleTP-Link TL-WR1043ND v1.8 compatibility report (march 2016)
In march 2016, I bought a TP-Link TL-WR1043ND v1.8, and setup a PirateBox v1.0 with. I downloaded the latest packages (Piratebox.zip v1.0.7 and Piratebox's OpenWRT) as of march 2016. I waited (too...
View ArticleTP-Link TL-WR1043ND v1.8 : compatibility break ?
In march 2016, all was OK for me about installing PirateBox v1.0(.7) package on a TP-Link TL-WR1043ND v1.8 ( [forum.piratebox.cc] ). However, as of november 2017 (I waited several months after the...
View ArticleRe: TP-Link TL-WR1043ND v1.8 : compatibility break ?
Hi, sorry, but that makes no sense to me. To find out what is wrong, I need the complete list of these commands after the installation failed: Technical Summary I guess, there was an installation...
View ArticleRe: TP-Link TL-WR1043ND v1.8 : compatibility break ?
Sorry for the harsh words. To tear down the issue, I need these information. for example, a common issue is: - Have the installed router with a fresh USB stick + install folder - during the first...
View ArticlePirateBox is setup and inactive but the USB key is always blinking
TP-Link TL-WR1043ND v1.8 : I have install with success the PirateBox (current version with current OpenWRT), and I wish to understand why the USB key is always active (blinking), for hours and hours....
View ArticleRe: TP-Link TL-WR1043ND v1.8 : compatibility break ?
I have finally succeed to install current Piratebox package with current Piratebox-OpenWRT. I do not know exactly what has changed, I have reformated the USB key. There was once a issue with the...
View ArticleRe: TP-Link TL-WR1043ND v1.8 : compatibility break ?
I am glad it is working now. The cryptic name is because of the activated mesh feature (but not activated mesh wifi). The name is the device specific random node name: CEpBGPrG.piratebox.lan (tu) best...
View ArticleRe: PirateBox is setup and inactive but the USB key is always blinking
If you enabled the timesafe function, it stores the current time every five minutes on the USB stick. There is also a few kB swap disk used, which is also on the USB stick. This is possibly another...
View ArticleRe: PirateBox is setup and inactive but the USB key is always blinking
Sorry, I forgot to say that I have not done the 'Post installation' steps ( [piratebox.cc] ) : Kareha and UPnP are not running. The USB key ("TOSHIBA TransMemory (1.00)", 32 GB, USB2) is blinking...
View ArticleRe: PirateBox is setup and inactive but the USB key is always blinking
> Any comment about the 32 MB vs 64 MB issue ? this is no issue, the opposite is the case: higher MB should reduce read/write cycles. the interestig output is already posted in OP, which indicates...
View ArticleRe: PirateBox is setup and inactive but the USB key is always blinking
> Q: Do you have the piratebox.lan page open when observing the blinking? Or is it even with no wifi connection? There is none Piratebox web page open, and there is none WIFI connection to the...
View ArticleRe: PirateBox is setup and inactive but the USB key is always blinking
After playing with the command: echo "1" > /proc/sys/vm/swappiness with 1 and 10 as values (and waiting 10 minutes between tests), I do not see any change, the USB key is still blinking very fast...
View ArticleRe: PirateBox is setup and inactive but the USB key is always blinking
The swappiness has no direct effect as long as the command "free" shows swap usage. We can try eliminate the theory, that swap is causing the issue, with running swapoff --all That command may take a...
View ArticleRe: PirateBox is setup and inactive but the USB key is always blinking
I don't know how to install a additional software tool to monitor the softwares disk activity, but i have find this way to check the general disk activity : cat /sys/block/sda/stat ( [www.kernel.org]...
View Article