Re: Returning MR3040 (or other TP-Link routers) back to original factory...
yes, you flashed it wrong, now your system is not bootable anymore. You need to get serial access to fix it.
View ArticleClik here to view.
Re: Unbrick a TP-WR1043ND v2
Looks to me like you connected the TX of your adapter to the 3.3V of the router board instead of the RX pin. Also I'm not completely sure why you changed the pinout, but the info you striked trough...
View ArticlePossible new hardware
[sites.google.com] I am told this will be the new version of the GL.iNet with similair hardware specs . It has a nice 5 pin GPIO header and a UART header.
View ArticleRe: Help with Piratebox installation.
Hi, I am new to PirateBox and I have a mr3040 and windows 8.1, I also have the same problem as fulk0520,could you please help me?
View ArticleHow to recover bricked MR3040
Hello, I came to know about PirateBox recently and bought a TP-link TL MR3040 (version 2.3), then I installed the piratebox and connected from telnet( PuTTY on windows 8.1) and set up a password and...
View ArticleRe: How to recover bricked MR3040
It's very difficult for him to provide more details on step two because it's different dependant on your operating system. But since you said you're using Windows - [www.howtogeek.com] Easiest way to...
View ArticleMR3040 lost cause?
So I got the MR3040 as a gift around Christmas last year and started the process of turning it to a pirate box. But at some point I must have done something wrong and it wasn't working. i tried for...
View ArticleRe: Access piratebox through lan network
Matthias Wrote: ------------------------------------------------------- > You can look it up on the router, > or you do > > > uci set network.lan2=interface > uci set...
View ArticleRe: Multiple storage devices?
Matthias Wrote: ------------------------------------------------------- > maybe it can work out, but I guess the tiny > devices do not have enough power to supply two or > more usb sticks. In...
View ArticleRe: install packages from openwrt repository onto pirate box
Matthias Wrote: ------------------------------------------------------- > you need to connect you box to the internet, run > the piratebox nodns command; then you can use opkg > like normal....
View ArticleRe: MR3040 lost cause?
I was thinking about doing one of the tutorials for restoring factory defaults or unbricking but wanted to check with the community first
View ArticleRe: Access piratebox through lan network
Devices need to be on the same subnet in order to connect like that, except for in my #3 below. That is, the first three sets of numbers need to be the same (so devices connected to 192.168.7.1 can...
View ArticleRe: Multiple storage devices?
You'll need a compatible powered usb hub that will be able to tell the difference between the two, but as Matthias said, it may confuse the box unless you are making sure all of the mounts are setup...
View ArticleRe: install packages from openwrt repository onto pirate box
Yes, download the .ipk file for the packages you'd like to install. Then just do $ opkg install packagename.ipk
View ArticleRe: Help with Piratebox installation.
Connect via ethernet cable, use putty select the option "telnet" choose the IP 192.168.1.1 and then post the output of the following command here in the chat tail -n 60 /var/log/messages regards
View ArticleRe: MR3040 lost cause?
Did you tried telnet instead of SSH or did you actually get a user & password prompt? if so, try to reset your password using the failsafe mode as described here: [piratebox.cc] (instead of the...
View Article