Re: Please help! Firmware issues TP Link 3020
Hi, ok, thank you for the detailed feedback. This clearly looks like an issue with power & USB sticks: [...] [ 58.020000] usb 1-1: reset high-speed USB device number 2 using ehci-platform [...
View ArticleNeed help resurrecting old Pirate Box
Alright so I made a piratebox out of a TP-Link TL-MR3020 a pretty long while ago (possibly 2-3 years ago ;D) and after a discussion with a friend about deaddrops (like USBs) I decided to resurrect it...
View ArticleRe: Need help resurrecting old Pirate Box
Hi, it seems you made good progress in recovering it. Congratulations :) The auto_flash feature only works for PirateBox 1.1 , it is not included in older PirateBoxes. It might run the installer with...
View ArticleRe: Need help resurrecting old Pirate Box
Thank you dearly for your response! After following the instructions from your link and executing mount /dev/sda1 /mnt cd /mnt/ mtd -r write openwrt-ar71xx-generic-tl-mr3020-v1-squashfs-factory.bin...
View ArticleRe: Need help resurrecting old Pirate Box
This error is expected, because the ssh key was regenerated through the reflash. That sounds promising :) Just remove the entry starting with 192.168.1.1 from /Users/Luke/.ssh/known_hosts best regards...
View ArticleRe: Zsun can't connect to wwan and is not broadcasting its ssid
Sorry for taking so long to respond. I took me a few days to build my adapter board. And thank God, I was able to short the missing receive line jumper as mentionned on Hackerspace, and therefore...
View Article/opt/piratebox/bin/board-autoconf.sh not found on my TP-link MR3020
When i type in /opt/piratebox/bin/board-autoconf.sh its comes back with not found anyone had this before ??
View ArticleRe: [Solved] Problem to Install PirateBox on TP-MR3020
Hello What was the fix as iv got the same thing happening i looked at the troubleshooting page and could not see it there Thankyou for your time
View ArticleRe: Need help resurrecting old Pirate Box
Done! I was able to successfully connect via ssh but I noticed that the forum on the main piratebox.lan/content/ interface only displays an index of directories. Any idea? I remember there being a...
View ArticleRe: Need help resurrecting old Pirate Box
Hi, ok, that we can solve. Login to your piratebox via SSH and run: /opt/piratebox/bin/install_piratebox.sh /opt/piratebox/conf/piratebox.conf content You might see some chown & chmod errors, just...
View ArticleRe: /opt/piratebox/bin/board-autoconf.sh not found on my TP-link MR3020
Hi, can you please post the output of the commands you find here: [piratebox.cc] Please continue if you receive any errors, this is expected in some error cases. Thank you , best regards Matthias
View ArticleRe: Need help resurrecting old Pirate Box
Seems the imageboard still isn't functional. When I enter the forum it says: "The kareha imageboard is not fully configured. Visit the following Link to do the initial configuration. Or go back to...
View ArticleRe: Need help resurrecting old Pirate Box
Ups, I forgot: you need to run the board autoconfig script /opt/piratebox/bin/board-autoconf.sh Please avoid special characters in the admin password.. :-/ After this, go back and try it in the browser
View ArticleRe: Need help resurrecting old Pirate Box
Executing the code removed the "software error" message, but now it's back to displaying the directories like before.. :S Index of /board/ Name Last Modified Size Type Parent Directory/ - Directory...
View ArticlePost Installation troubles
Hello all, I followed the installation guide and then when I got to post installation I was able to set up a password and the date/time just fine. When I try to install the image board and the UPnP...
View ArticleRe: Please help! Firmware issues TP Link 3020
Hi Matthias, Sorry for the delay but I have been travelling. The problem did appear to be the power issue. Once I used the OEM PSU and ensured the USB sticks were formatted on an Ubuntu system, I was...
View ArticleRe: need help. TP-Link MR3020
The problem I experienced was being caused by using a single USB A connection to my computer and not both USB A ports on the 3020 supplied cable. Matthias suggested I try using the OEM PSU which I did...
View ArticleRe: Need help resurrecting old Pirate Box
I suppose this is a unique problem? I might just have to connect it to the gateway router and follow this tutorial as I had never connected it to the internet when I set it up like this guide...
View ArticleRe: Zsun can't connect to wwan and is not broadcasting its ssid
I finally received more Zsuns and was able to install PirateBox without almost any problem. More about this in a moment. I just want to confirm that what went wrong in my first installation is the...
View ArticlePirateBox Not Redirecting to piratebox.lan/content for Laptop (but does for...
Hello, New to the forums and made my first pirate box today. I am using the TP-Link 3020. I used the instructions as per the main page and I got everything installed/updated fairly easily. The issue I...
View Article