Re: New Guy Needs Help Please
When I have the MR3020 attached to my home router by ethernet and then I wirelessly connect to the labtop this is what my network settings show [dl.dropboxusercontent.com] the IPv4 address though...
View ArticleNoob having trouble with TP-Link TL-WR703N
I've been following the directions in the davidarts guide for this device... I got the new firmware installed no problem, but now I can't access the device at all... It won't grab an IP on the wired...
View ArticleRe: New Guy Needs Help Please
Z In your case (based on the pics you linked), 192.168.1.1 is your home router (option gateway ! ) 192.168.1.x any device connected to your home network 192.168.2.111 is the address of the PirateBox...
View ArticleRe: MR3020, No Wireless Network
Well, I re-ran the PirateBox installation and it appears to be working now. I'll hunt through the forums for any other questions I have. Thanks for the help! - M.
View ArticleRe: can't ssh or telnet
I am having the same issue. I changed the network settings and tried to ssh into it, and failed. I then tried to telnet, but my laptop wont let me connect to it. I tried putting it in failsafe mode,...
View ArticleRe: New Guy Needs Help Please
That worked perfectly, thanks so much. I am now up and running!
View ArticleRe: can't ssh or telnet
alleybeach, what new settings did you imply? Please note that telnet will not work after you have set a password, only SSH. If you have changed "option ipaddr" in /etc/config/network then you should...
View ArticleRe: can't ssh or telnet
i made the ipaddr 192.168.2.122, and i did set a password. i dont know how to change my ip (noob i know, can you help me with that? im running ubuntu). my ip according to wlan0 192.168.2.122 the...
View ArticleRe: can't ssh or telnet
Changing to static IP in Ubuntu: [*] Click on the wifi icon in the top menu bar [*] Select "wired" connection and edit [*] Go to "IPv4 Settings" tab and set the method for manual with the following:...
View ArticleRe: can't ssh or telnet
alright! sweet, Im in! haha. so is it ok to have the PB's IP address 192.168.1.1 while i try to ssh into it?
View ArticleRe: can't ssh or telnet
so i have a PB running now! however, i cant get the image board running though. says permission denied :/
View ArticleRe: can't ssh or telnet
Quotealleybeach alright! sweet, Im in! haha. so is it ok to have the PB's IP address 192.168.1.1 while i try to ssh into it? Sure. IP addresses only become an issue when your home router has the same...
View ArticleRe: can't ssh or telnet
i just updated the version and it seems to want to install better. keeping fingers crossed! :D
View ArticleRe: NEW OPEN WRT SUPPORT FOR TP-Link TL-MR10U (:D
Tl-Mr10u latest openwrt images [downloads.openwrt.org]
View ArticleRe: NEW OPEN WRT IMAGE WORKING FOR TP-Link TL-MR13U >:D
Latest version of working firmware mr13u image Tl-mr13 u Forum [forum.openwrt.org]
View ArticleRe: NEW OPEN WRT IMAGE WORKING FOR TP-Link TL-MR13U >:D
I think - to be honest- this device is awesome!! The community only have to work out a working openWRT image ;) ... Will do tests and so on soon.
View ArticleRe: New Guy Needs Help Please
I don't quite understand how to get into failsafe mode. I have however managed to get to the OpenWrt mainscreen on the terminal, how I did it? I have no clue but the good thing is I know I can still...
View ArticleBacking Up Your Piratebox Image :-)
Here I would like to share how to backup your piratebox image so that you don't have to reinstall by connecting to the internet. Backing up the image : 1. Connect to your working Piratebox by Putty (...
View ArticleRe: New Guy Needs Help Please
If you could access the terminal, you don't need to failsafe.
View ArticleRe: unable to ping external ip address after installing openWrt
Wow....I am really excited to install this. Your full tutorial is really what I need.
View Article