Re: No wireless network
Hi! Yes, MR3020 by ethernet. Results: 1.) cat /etc/config/network root@OpenWrt:~# cat /etc/config/network config interface 'loopback' option ifname 'lo' option proto 'static' option ipaddr '127.0.0.1'...
View ArticleUrgent Help
Hello there, So i got a TP MR3040 and i followed the instructions from here: [piratebox.cc] . At step 2 at post installation process (as i had no idea what I was doing because the instructions were...
View ArticleRe: MR3020 does not serve home page any more [Solved]
Quote still would like to understand how could have happened that, playing with the location of the Upload directory, it turned out to have the /mnt/ext/lib, /mnt/ext/usr, /mnt/ext/tmp and all the...
View ArticleRe: TP-Link TL-MR3020 mass flashing
Hi, I never tried, but you should be able to flash the devices like described above. But make sure the USB Sticks are all prepared and plugged to the MR3020. Maybe you can ask Jason Griffey, who...
View ArticleRe: MR3040 Installation Issue - Cannot not Telnet in on 192.168.1.1...
Hi, the username is "root" Matthias
View ArticleRe: Got Problems installing Piratebox on TPLink3040
Proch, sometimes the flash isn't 100% correctly done. This is not your fault.. I describe it, that a byte is not flipped correctly during that procedure. Try to restart using the upgrade tutorial and...
View ArticleRe: Confirmed way to install PHP in OpenWRT?
hi, the latest howto is: [piratebox.cc] You may try the package opkg -d ext install extendRoot-php that is what is installed during LibraryBox installation. Did you followed that one? What issues did...
View ArticleRe: How To for OpenWRT needs to be updated
Hi awblanton , thank you for the hint! I added that note to the hardware compatibility list. Maybe it works with our custom firmware, but I won't recommend trying it. Our custom firmware has only some...
View ArticleRe: Urgent Help
Hi, try to follow this howto for reflashing your device with using the failsafe mode and the usb stick. You need to place the image file to the usb stick before you start. And make sure, you setup a...
View ArticleRe: No wireless network
Hey, somehow the first mount failed.. and the 2nd one did work. But now you need to retrigger the installation. try the following steps, after you telnet into the box mv...
View ArticleRe: MR3020 does not serve home page any more [Solved]
No, I didn't run /etc/init.d/ext init. Actually, the connection makes no sense. Lesson learned so far: enthusiastic, I was doing things too fast => one has to act as an administrator even if the...
View ArticleRe: Known hardware - firmware combinations
Hi all, New to forum. This project is fascinating! I have auto installed my TL-MR3020, no problem. And I had an old WZR-HP-G300NH lying around and can figure out how to upgrade to latest release. I...
View ArticleRe: No wireless network
K, it's doing it's thing. I'll know when it's done by getting a new prompt, right? Forgive my newness... [edit] Got it, thanks! Just gotta figure out how to change the username and pw for the Kareha...
View ArticleHave I bricked this 3020
Had a previous installation that I wanted to update to 1.0.... Followed the update instructions and waited.... Hours later showed the WIFI network but I could not connect, tried to telenet and this...
View ArticleRe: Known hardware - firmware combinations
Hi, check out this howto [piratebox.aod-rpg.de] That should help. Matthias
View ArticleRe: Have I bricked this 3020
Can you please post the content of the install.log from your usb stick? Thanks Matthias
View ArticleRe: Have I bricked this 3020
Matthias: There does not appear to be any install.log file in any directory. Tom
View ArticleRe: Have I bricked this 3020
I do think it might be important to note that.... The USB stick led flashes for about 2 seconds on startup The Notebook connected to the box shows a link immediately after the USB stops flashing. So...
View Article