Re: MR3040 V2.3 does not mount drive after first reboot of install
Matthias, Yes, after putting in the battery and letting it charge for a few minutes the device mounted the USB drive after the first boot of th install process. This thread can be changred to SOLVED....
View ArticleRe: Ext3 install support for large disks
Hi Matthias, Thank you for steering me off to your beta section; I realize now that this tutorial applies to beta only and will not work on prior ipk builds I.e. 0.6.3. Etc I have got ext4 to mount...
View ArticleRe: Known hardware - firmware combinations
trully awesome project! im going to try to instal on my DIR-505 this weekend. cheers!
View ArticleRe: Known hardware - firmware combinations
Hi Matthias, Can please provide me with a how to for adding minidlna to work with your 1.0 release? I found the sample config and also tried to instal and run it but it doesn't seem to work.
View ArticleRe: Known hardware - firmware combinations
You need to run /etc/init.d/piratebox nodns opkg update opkg -d ext install extendRoot-minidlna Then you should bring the config in place, like you already did.
View ArticleRe: Have I bricked this 3020
Hi Tom, try to get into failsafe mode and reflash your device. Here are some instructions: [piratebox.cc] Matthias
View ArticleRe: Known hardware - firmware combinations
Good man! Thank you very much :) All I had to do was follow your post above and then from your previous tutorial just: cd /tmp wget [downloads.piratebox.de] cp openwrt.example.minidlna...
View Articlemr3040 openwrt not working
Hi. I installed the file 'openwrt-ar71xx-generic-tl-mr3040-v2-squashfs-factory.bin' on my TL-MR3040. Everything went fine during the installation but after it finished I wasn't able to access openwrt...
View ArticleTP Link 3040 Streaming very impressed
I gave my TP Link little beating a few days ago. I was really curious how many devices it could stream to at the same time using MiniDNLA. I successfully streamed to 5 devices at the same time. All 5...
View ArticleRe: Returning MR3040 (or other TP-Link routers) back to original factory...
Hey, I'm new to using dd. Having trouble clipping the manufacturer firmware file down to the right size. Help? Aaron
View Articlecouple of mr3040 qs.
ok, caveat to this, im not good at linux, im mainly looking into decentralisation systems, this being the first one i've installed. 1. is swapping USB keys as easy as the 3020? (ie copy everything off...
View ArticleRe: couple of mr3040 qs.
oh, by the by, the instructions were brilliant, and so easy to follow and get up and running, this is just the sort of quick start kit needed imho. i'll be trying a Pi version in the near future too,...
View ArticleCan't ping 192.168.1.1 on WIFi
Have a TP-Link TL-WR1043ND that I pirateboxed. It was working for a while but last time I checked it, DHCP was giving out 192.168.1.x addresses on the WiFi, but strangely I could not route to...
View ArticleRe: Can't ping 192.168.1.1 on WIFi
Nevermind. Looks like I had mucked up an entry in /etc/config/dhcp.
View ArticleRe: Returning MR3040 (or other TP-Link routers) back to original factory...
what trouble do you have? ....
View ArticleRe: mr3040 openwrt not working
well it seems you are connected to your homerouter instead of the openwrt... which means, that you have an ip address conflict. Setup a static ip to your wired network card, connect your computer to...
View ArticleRe: couple of mr3040 qs.
>> 1. is swapping USB keys as easy as the 3020? (ie copy everything off one to the other, restart?) yes, if you copy everything to a fat32 formatted drive, yes. >> 2. minidlna, will this...
View ArticleRe: Returning MR3040 (or other TP-Link routers) back to original factory...
how do you change firmware filename with dd?
View Article3020 Noobie Stuck
Hey guys, I setup my piratebox last night or I should say attempted to. I made it to this step following the tutorial vi /opt/piratebox/www/board/config.pl I edited the password and username, I had...
View ArticlePiratebox not installing on MR3020
I've followed all the steps from the main tutorial except that my USB drive mounts to /mnt/sda5 instead of /mnt/USB. I flashed the firmware following the usual procedure but when I leave it there to...
View Article