trying to upgrade on mr3020 telnet only
helo i was having issues getting into my piratebox to update to the latest pb 1.0 but successfully got it inot failsafe and im in it now via telnet but have hit a roadblock how should i repair it...
View ArticleTrouble installing PHP5
I am trying to install PHP5 to my new pirate box but I can't get the php5-cgi package installed. I don't know why the opkg does not install that package into the mounted drive. Can someone help me out...
View ArticleSetting a static IP in Linux for Piratebox install
Hi all Does this look correct: Address= 192.168.0.2 (Of my PC) Netmask= 255.255.255.0 Gateway= 192.168.0.1 (The same address you use to get into 3040 interface) DNS Server = 192.168.0.1 Thanks
View ArticleRe: Setting a static IP in Linux for Piratebox install
My TP-Link 3040 version 2.2 should be here today! I shall do the dirty work and report back tonight ;) Wish me luck I'll need it.
View ArticleNeed Help with MR3040
Okay here's my issue. I followed the instructions to a "T" but still don't have access to the MR3040. I do have access through telnet. I can access root and edit config stuff and I can see that it is...
View ArticleRe: Trouble installing PHP5
Hi, it seems, that you already tried to install parts of the PHP packages to root (without -d)... and that already failed. I never figured out, how you can overcome the problem, that opkg will try to...
View ArticleRe: Setting a static IP in Linux for Piratebox install
Hi, you can leave out the dns and gateway setting. Remember, that after flashing to PirateBox-OpenWrt you need to turn back the setup to automatic or switch to ip: 192.168.1.1 netmask: 255.255.255.0...
View ArticleRe: Have I bricked this 3020
Hi, yes, I think it is bricked. you need to reflash via serial access and TFTP (when uboot has no defect). Sorry to say that. Matthias
View ArticleRe: Cannot install OpenWRT onto MR3010
Hi Febon, you try to figure out which Version number is your MR3020 ? That is shown at the package on a tiny label. Maybe this is a new version that has some changes on the firmware :( Did you tried...
View ArticleRe: TL-MR-3020 upgrade (openwrt to piratebox)
When you have no PirateBox-OpenWrt firmware brand on your router, you may need to use another way. Another way is possible to download the firmware to the box, using you computer as a webserver. Ideas...
View ArticleRe: trying to upgrade on mr3020 telnet only
Hi, if you already have an PirateBox image installed to your box, this howto might help: [piratebox.cc] Matthias
View ArticleRe: Need Help with MR3040
Hi, it can be, that your usb stick formatted in a wrong way. when you have the USB stick connected to your PirateBox and you login to it, then check out the following and post it to the forum: ls...
View ArticleRe: Need Help with MR3040
ok this is what the message I get. Thanks for all your help with this. [ 11.270000] sd 0:0:0:0: [sda] 62521344 512-byte logical blocks: (32.0 GB/29.8 GiB) [ 11.280000] sd 0:0:0:0: [sda] Write Protect...
View ArticleRe: trying to upgrade on mr3020 telnet only
Thank you for the response matthias I have the device in failsafe mode and the USB drive is blank openwrt is installed and I have tried to put the piratebox install folder on the drive and restart it...
View ArticleRe: Setting a static IP in Linux for Piratebox install
Thanks again thats exactly how I did it and it was perfect.
View ArticleRe: Need Help with MR3040
Matthias Wrote: ------------------------------------------------------- > (The other idea, that came in my mind, but wasn't > test by myself is to change the configuration to > use /dev/sda...
View ArticleMR3040 V2.4 and hardware specifications
So, it would seem i'm new to making pirate boxes, and I have a few questions. 1)what is the MINIMUM space required on the usb to it work? my 4gb has an install log that has "not enough space" errors...
View ArticleHelp required for the MR3020
Hey, I'm a first timer, so please bare with me. I got my router and accessed 192.168.0.254 and uploaded the new firmware in System Tools. A prompt came up saying that the new firmware had been...
View ArticleRe: Need Help with MR3040
I believe I was in the same boat as Primordial, but I think I just made it worse that "not working" Trying to do it all on a Win7 laptop (for convenience) and I guess when I plugged in my USB drive it...
View ArticleRe: Need Help with MR3040
I think I may have it: my USB drive has been blinking like crazy! Used this link: [www.disk91.com] to set my box back to network-able and used SSH to break into it and re-download the openWRT directly...
View Article