TL-MR10U installation stuck at creating swap partition
Hi, I am trying to install pirate box in my TP-link tl-mr10u router. I installed openwrt which loads fine. But the installation of pirate box is stuck at creating swap file forever. The serial console...
View ArticleRe: Need Help with MR3040
Yea at first I thought is was a little too big and looked for a smaller one. But then thinking about it those pockets will be perfect for all the plugs and extras. I will get one of these for sure.
View ArticleMove from LibaryBox to PirateBox
Hello dear Users, I use a TL-MR3040 running the latest libarybox. I understand that piratebox and libarybox are essentially the same project with differen confugurations. But How do I switch to the...
View ArticleRe: [UNSOLVED] Post-Install issue
Hi, during the reflash, the box changes the SSH Key. That is the reason for this issue. To fix that simply run: rm /root/.ssh/known_hosts on your local machine. Matthias
View ArticleRe: MR3040 V2.4 and hardware specifications
Hi, here. [forum.piratebox.cc] and here [piratebox.cc] ;) Version Number updated Thanks for the feedback Matthias
View ArticleRe: TL-MR10U installation stuck at creating swap partition
Can you please post the output of the install.log on the USB Stick? Thanks & best regards Matthias
View ArticleRe: Move from LibaryBox to PirateBox
Hi, the easiest way is to exchange the files on the USB Stick (install folder and openwrt....bin file) and then reflash using this tiny howto: [piratebox.cc] it is not a very comfortable way, but that...
View ArticleRe: [UNSOLVED] Post-Install issue
Thank you very much Matthias. That worked great, and I think everything is back to normal now. I got the full vi file this time so hopefully no more issues. ~Skaggsr
View ArticleRe: Post-Install issue
Alright, I guess that wasn't the last problem. I have everything up and running now and can connect to the box with Debian and Windows Phone, but not with OS X. It just will not redirect or load if I...
View ArticleRe: Have I bricked this 3020
Matthias: Thanks for your help on this! I guess these are the dangers of technology. I have purchased a 3040 with a micro USB and that is the way to go! Tom
View ArticleSSID visible but can't join, "DHCP Lookup Failed"
Hey all, Setting up an MR3040 and seems like things were going OK so telnet'd in and set a root password. I must have jumped the gun because when I went to switch over to the Piratebox SSID for...
View ArticleRe: SSID visible but can't join, "DHCP Lookup Failed"
Hi Jason How I did it was put my cell phone in WiFi mode and just looked for the Share Freely Network to appear. It does that twice the second time you see it appear wait another 10 min at least and...
View ArticleRe: SSID visible but can't join, "DHCP Lookup Failed"
Thanks for the tip Ubuntulover, I waited awhile and then power cycled it, then waited some more, and it seems to be operational now. The forum returns an index of its files instead of a web page, but...
View ArticleRe: SSID visible but can't join, "DHCP Lookup Failed"
To fix that index thing just Point your browser to "[piratebox.lan]; for the first initialization while connected to the Share Freely Network. That will fix the index problem.
View ArticleRe: SSID visible but can't join, "DHCP Lookup Failed"
As per Post-Installation step #4 Use that address not the piratebox.lan
View ArticleRe: Post-Install issue
Double check network settings. Do you have any static DNS settings on you MacOS ? Verify if you have a http:// and not https in your browser. Matthias
View ArticleRe: MR3020 reboots if DLNA is enabled
Dear Sir Matthias, Please see screenshots of my anonymized file list on the following links below. [dl.dropboxusercontent.com] [dl.dropboxusercontent.com] [dl.dropboxusercontent.com] As you can see,...
View ArticleRe: trying to upgrade on mr3020 telnet only
i gave up on the mr3020 and bought a mr3040 because i was going to anyway i followed the steps carefully and installed openwrt onto the mr3040 the system rebooted and i atempted to use puty to setup...
View ArticleRe: trying to upgrade on mr3020 telnet only
Well i logged onto the irc and a nice fellow helped me fix this box and at the end of it all i asked his name on the forums so i could credit the person who helped me save my piratebox and it was...
View ArticleRe: sandisk 32gb compact USB for MR3040
Yea I'm thinking on getting the Sandisk 64 gb Cruzer Fit. Sandisk seems to be very reliable for the Piratebox. I think I'll stick with that brand.
View Article