Reinstall woes on TL-MR3040 fixed
To reinstall PirateBox I do this: * Put the install folder and the openwrt firmware on USB as usual, and put in device. * Start the device and connect directly via cable to a PC. * Connect using for...
View ArticleRe: Reinstall woes on TL-MR3040 fixed
Nice thanks for posting. I will add this to my notes. Cheers!
View ArticleConnection Refused( 3040 Post Installation Trouble)
After successfully screwing up the configuration of /opt/piratebox/www/board/config.pl, I plan to revert to factory settings. The one issue is whenever I try and telnet into 192.168.1.1 I continue to...
View ArticleRe: SSID visible but can't join, "DHCP Lookup Failed"
Thanks again Ubuntulover, that did the trick!
View ArticleExtending range with TP-LINK TL-WR702N
I bought a pair of TP-LINK TL-WR702N AP's awhile back expecting to run Piratebox on them but later realized I got the wrong model (not enough RAM or something). Anyway, I have an MR3040-based...
View ArticleRe: MR3020 reboots if DLNA is enabled
Hi, thank you for posting this. I'm getting this error already on tinyer files. -- And I had bigger files in there too.. I'm asking David about his experience.. Maybe something is wrong with the...
View ArticleRe: Connection Refused( 3040 Post Installation Trouble)
you can copy over a backup of the config file. After you setup the password, you have to use ssh username root. For MAc& Linux run: ssh root@192.168.1.1
View ArticleRe: Extending range with TP-LINK TL-WR702N
Hi Jason, yes, you can't run OpenWrt on it :( You can try to run in repeater mode using the SSID "PirateBox - Share freely"... but I'm not sure how to setup it up correctly on the TPLink firmware.....
View ArticleRe: Extending range with TP-LINK TL-WR702N
Thanks for the response Matthias! I plan to use the setup in the field, likely housing the devices in something weather-resistant and solar powered :) I'll play with the repeater mode stuff, I was...
View ArticleTL MR 3020 Bricked?
Hello to all and congrats for your amazing work here ! I had succesfully installed pirate box on the TL3020 but by mistake i formatted the usb drive and now i can't do pretty much anything... I tried...
View ArticleRe: TL MR 3020 Bricked?
So the problem is that you can't configure the network on your PC to use a static IP, instead of DHCP? I use Ubuntu and I simply create a new network connection in the network manager in the GUI, with...
View ArticleRe: MR3020 reboots if DLNA is enabled
Okay Sir, I'll just wait until there is a permanent fix for this. It's still a great project (tu)! Thank you so much (:P)
View ArticleRe: Connection Refused( 3040 Post Installation Trouble)
ssh is also giving me the connection refused message
View ArticleRe: Connection Refused( 3040 Post Installation Trouble)
Truos are you using the correct password for SSH? Try Putty input your IP and tick SSH then connect. When prompted for the password use whatever it is you set when you used passwd command. Let us know...
View ArticleRe: Connection Refused( 3040 Post Installation Trouble)
Hello all, I'm having the same problem. I'm 100% sure that I'm trying to connect to the correct IP as well. I checked the MAC address that I have saved from earlier (when I simply had raspbian on it)...
View ArticleRe: Connection Refused( 3040 Post Installation Trouble)
It should be noted that I plugged everything (Edimax wifi converter, small USB flash drive, ethernet, and power) directly after installing the piratebox image. I didn't plug it into a monitor or...
View ArticleRe: Connection Refused( 3040 Post Installation Trouble)
interestedparty: When you use the passwd command that is what activates SSH. Did you do that step? Sorry ignore yours is the Pi. I don't know if that step is needed for yours.
View ArticleRe: Connection Refused( 3040 Post Installation Trouble)
Make things simple. Connect using a cable, directly between the router and a PC. You will have to change the network settings temporarily on the PC to used static IP, for instance 192.168.1.2. Make...
View ArticleRe: TL-MR10U installation stuck at creating swap partition
Thank you, Matthias, for your helping hand. I apologize for my late response. I was not aware of the install.log before, thanks for pointing me to that. Interestingly, it's started working after I...
View Article