Re: Protect with password?
Check out the index.html like described above.. you should find that text there as well. Matthias
View ArticleRe: TP-LINK MR3040 - Stopped working after PirateBox install
where did you download the .bin file? when did you download the .bin file? Do you see any other folders on the system? Which how-to did you follow? Can you login via failsafe mode and run mount_root...
View ArticleRe: TP-LINK MR3040 - Stopped working after PirateBox install
I noticed that in telnet it shows root@(none) which seemed unusual. I can not cd to init which seems one of the methods to recover. Also I can not cd /mnt/usb, cd /mnt works but it seems it does not...
View ArticleRe: TP-LINK MR3040 - Stopped working after PirateBox install
the IP is 192.168.1.1 Failsafe mode has no configured system. it is only to get back to the box and fix configurations. And additional with the non configured system, so even no webserver is up and...
View ArticleRe: TP-LINK MR3040 - Stopped working after PirateBox install
followed this guide: [piratebox.cc] used files from: [stable.openwrt.piratebox.de] openwrt-ar71xx-generic-tl-mr3040-v2-squashfs-factory.bin version 1 would not work /sbin/mount_root: line 1:...
View ArticleRe: TP-LINK MR3040 - Stopped working after PirateBox install
before we did the pirate box we were able to get to the the router login at 192.168.0.1 and it was working fine.
View ArticleInstall issue
Hello i just got the tplink 3040 i downloaded the pirate.zip and the V2 firmware as followed, i went through the install instructions to update to my correct firmware i downloaded, it when through the...
View ArticleRe: Install issue
Hello i just got the tplink 3040 i downloaded the pirate.zip and the V2 firmware as followed, i went through the install instructions to update to my correct firmware i downloaded, it when through the...
View ArticleRe: Install issue
im guessing from this i didnt let the software install long enough or correctly and has caused a issue, so im guessing how do i start all over agian or reflash to stock rom and start over thank you
View ArticleRe: TP-LINK MR3040 - Stopped working after PirateBox install
Hi, can you try to review my post with the commands above please. I really really need the output of the last commands. Again, after flashing, the device changes its IP from TP-Link's default...
View ArticleRe: Install issue
Hi, I need to get the install.log from the USB Stick, this is the first step. Can you post it into the thread please? Then, when you are able to login via telnet, I assume, your installation is not...
View ArticleRe: Install issue
Jan 1 00:00:47 OpenWrt syslog.info syslogd started: BusyBox v1.19.4 Jan 1 00:00:47 OpenWrt user.notice root: /bin/box_installer.sh : executing run_test Jan 1 00:00:47 OpenWrt user.notice root:...
View ArticleRe: Install issue
Hi, thank you very much. Can you verify that you have your install-folder on you USB stick? the folder-structure should be <usb>/install <usb>/install/cache Matthias
View ArticleRe: Install issue
PBX_auto_Image_2.2 DISTRIB_ID="OpenWrt_backports" DISTRIB_RELEASE="12.09.2" DISTRIB_REVISION="r40431" DISTRIB_CODENAME="attitude_adjustment" DISTRIB_TARGET="ar71xx/generic"...
View ArticleRe: TP-LINK MR3040 - Stopped working after PirateBox install
root@(none):/# ls -la /mnt/ drwxr-xr-x 2 root root 3 Apr 18 2014 . drwxr-xr-x 16 root root 223 Oct 10 2014 .. root@(none):/# root@(none):/# ls -la /mnt/usb ls: /mnt/usb: No such file or directory...
View ArticleRe: TP-LINK MR3040 - Stopped working after PirateBox install
which operating system do you have on your computer? If it is linux - Do you think you can redownload the image file and then do a reflash like in this tutorial? [www.piratebox.cc] Matthias
View ArticleRe: TP-LINK MR3040 - Stopped working after PirateBox install
then please give that one a try: [www.piratebox.cc] that should work - and if you can't mount /dev/sda1 , you can assume, that you usb stick is not configured with a partition, but formatted directly...
View Article