Re: Install issue
well, that is the reason why it does not work.... redownload the install.zip please and extract it to the usb stick
View ArticleRe: Install issue
Yeah, than put that USB stick with the filled install folder back into the router and power-cycle it. Please be patient. That will take a while. The blinking LEDs should indicate the box as working....
View ArticleRe: Install issue
ok so i put the usb stick in and pulled the battery and restarted the router, as i see lights flashing on thunb drive and router, at which point do i try or do something and how do i know that when...
View ArticleRe: Install issue
Hi, You know that is done, when it did a reboot and at least 3 lights are steadily online (not flashing). Depending on the speed of the USB drive, you can assume an installation time between 20 and 40...
View ArticleRe: TP-LINK MR3040 - Stopped working after PirateBox install
Somewhat confused. What file should I be using? The file from the wiki page or the original firmware file. mr3040 version 2.4 I did get as far as setting the IP on my PC and the ping was working Can...
View ArticleRe: Install issue
Thank u it has installed. last question am i able to modify the looks of the site etc? and addons? were or how do i get to the files ro modify if this is possible last question. and thank you so much...
View ArticleRe: TP-LINK MR3040 - Stopped working after PirateBox install
After no luck at all, in desperation I tried to reflash with the TP-LINK firmware. Now I have lost the ability to telnet and the router just blinks all the lights off and on, over and over. At this...
View ArticleRe: Install issue
Hi, the webpage is located under the folder /opt/piratebox/www , you can find help about modifiying etc. under this forum section [forum.piratebox.cc] and this webpage [www.piratebox.cc] Have fun with...
View ArticleRe: TP-LINK MR3040 - Stopped working after PirateBox install
congratulations, the most tries to flash back the original firmware results in a near-brick experience. If you have no experience in command line and which file you should use, sou shouldn't do a...
View ArticleRe: Install issue
First i wanted to thank you for your help in getting my box up and running Matthias, and thank you the links, only thing i have seen is and this is my last question on this thread. Were we can upload...
View ArticleTrouble Setting Up Piratebox on TL-WR1043ND ver 2.1
Hello, It seems like the piratebox is set up properly. I believe that I have followed all the instructions here. [forum.piratebox.cc] Right now, I can connect via wi-fi to the piratebox router. It...
View ArticleRe: Install issue
Uploads are always directly into the root folder of <usb>/PirateBox/Shared You can change the directory to a different one like <usb>/PirateBox/Shared/unsorted , but you cant choose the...
View ArticleRe: Trouble Setting Up Piratebox on TL-WR1043ND ver 2.1
Hi, first of all, that howto is obsolete. Version2 of that device is only supported by BrakingBarrier-OpenWrt, which we currently not support- and that results in the problems you encountered. Sorry....
View ArticleRe: Trouble Setting Up Piratebox on TL-WR1043ND ver 2.1
so will it work if i install that version of openWRT? where can i download it?
View ArticleRe: Trouble Setting Up Piratebox on TL-WR1043ND ver 2.1
Hi, sorry to mispoint you, I corrected my post above. The PirateBox software is only running on the old AttitudeAdjustment-OpenWrt-Release. BreakingBarrier is not supported, which unfortunately only...
View ArticleRe: Trouble Setting Up Piratebox on TL-WR1043ND ver 2.1
Do you by any chance have plans to support Breaking Barrier? Are there any workarounds? Alternative programs to use? Argh I bought the router only for pirate box...
View ArticleRe: Trouble Setting Up Piratebox on TL-WR1043ND ver 2.1
I'm planning to do some work on BreakingBarrier support at the end of the year. The problem is, that OpenWrt did changes in the programm responsible for the bootup. That programm is an "OpenWrt only"...
View ArticleRe: Trouble Setting Up Piratebox on TL-WR1043ND ver 2.1
What I would like to do is to create an AP that people could access using their cellphones in order to download files. Could I do this with a library box? If so, could you please direct me to where I...
View ArticleRecovering by failsafe: connection lost after ~30 sec
Hello, working on my PirateBox - will tell about it in detail if necessary - suddenly was no more able to connect: the box boots the wireless signal is there but it does not connect 192.168.1.1 is...
View Article