Re: Recovering by failsafe: connection lost after ~30 sec
So it seems that the IP of your computer changed for some reason, and you lost the connection. Fix that and change the IP of your computer back and everything should work fine.
View ArticleRe: Recovering by failsafe: connection lost after ~30 sec
This was clear to me, but what changed the IP? Perhaps a behaviour of the network manager? (I'm on Debian 7.6). Any way, eager to look into the box, I tried with another machine. Ok with the failsafe,...
View ArticleRe: Recovering by failsafe: connection lost after ~30 sec
Hi, please run a filesystem check against you usb stick and see if you have some findings. Then try to connect via ssh and normal mode with a static IP ~ i.e. 192.168.1.2 And please repost the the...
View ArticleRe: Trouble Setting Up Piratebox on TL-WR1043ND ver 2.1
LibraryBox has exact the same problem -sorry :(
View ArticleRe: Recovering by failsafe: connection lost after ~30 sec
Running the filesystem check on the usb stick: root@debian-thinkpad-x220:/home/arf# fsck -v /dev/sdb1 fsck from util-linux 2.20.1 dosfsck 3.0.13 (30 Jun 2012) dosfsck 3.0.13, 30 Jun 2012, FAT32, LFN...
View ArticleRe: Recovering by failsafe: connection lost after ~30 sec
Oh... in the "second way" I often use the PirateBox it still works! I mean: if you connect via Ethernet to your local network it acts as a wifi point, letting you to reach the Internet via wireless,...
View ArticleRe: Recovering by failsafe: connection lost after ~30 sec [solved]
Ok, all of a sudden I remembered to have an usb stick with me, where I copied the content of the other one. With this "backup usb-stick" it works regularly! So, the problem was not due to my mods but...
View ArticleRe: Recovering by failsafe: connection lost after ~30 sec [solved]
Yes, it was mostly caused by the defect USB Stick, I think. I encountered that stuff a few time for myself, too - --- but for me I still had ssh access. so maybe some other handling mistakes or so...
View ArticleTL-MR3040 V 2.1 upgraded to 1.01
I have upgraded, but was unable to follow the recommended procedure. My TL-MR3040 is version 2.1 and when I attempted a sysupgrade I just got an error message about image check failed. But reflashing...
View Article(tu) PB on TL-MR3040 with SSD
I put my old 80 GB Intel X25 SSD in a USB case, formatted it to fat32 and copied over the files from the USB stick. And it just worked. Nice. I assume that this will improve performance somewhat, but...
View ArticleRe: TL-MR3040 V 2.1 upgraded to 1.01
Hi, no it should work. I wonder why the sysupgrade fails... btw I exchanged mtd with it, because it prevents false flashing Matthias
View ArticleRe: (tu) PB on TL-MR3040 with SSD
Can you try to find out what hte issue is? To to that login and run /etc/init.d/piratebox restart
View ArticleIP changed?
Hi -- Have managed to reinstall PirateBox onto my TP MR-3040 (read the discussion here) and can see its SSID in my connection tab. I'm able to connect to the network but nothing loads up. I'm assuming...
View ArticleRe: IP changed?
The pb has two different interfaces. Cable and wifi. And they will have different ip. Try to disconnect from all other connections before you connect to the pb. Your computer may have more than one...
View ArticleRe: IP changed?
Hi, I just have to correct the post above in this sentence QuoteThe pb has two different interfaces. Cable and wifi. And they will have different ip. The PirateBox on OpenWRT have two physicall...
View ArticleRe: IP changed?
Disconnected my ethernet and connected over wifi. My network settings still claim the box's IP is 192.168.1.155. I can SSH into the box via root@192.168.1.1, but not the other address. Still no...
View ArticleRe: IP changed?
Good to know that it is the same IP for both wifi and cable on OpenWRT. I suspect that your computer is using network settings it got from an earlier connection. Gateway and IP. Try to unplug the...
View ArticleRe: NEW OPEN WRT IMAGE WORKING FOR TP-Link TL-MR13U >:D
I got the TL-MR13U PB working, e.g. chat, file share, streaming etc.. between mutiple devices, however, I have two questions: 1- In order to get it working and connect I need to keep the installation...
View ArticleRe: NEW OPEN WRT IMAGE WORKING FOR TP-Link TL-MR13U >:D
Hi, yes. You have to use the USB Stick and leave it attached- and no, 3G is not possible. MAYBE if you have a USB Stick with a microSD slot (and you transfer the files ). - But I only assume that....
View ArticleTP-Link MR3040 v2.3 quick question
I managed to flash my device back to a factory firmware. Now I just have one question. Is there a more preferred or solid guide to installing PB on the 3040 v2? I've found quite a few different...
View Article