Re: TP-Link MR3040 Questions
however it does look like wireless needs to be enabled by setting option disabled 0 in /etc/config/wireless This site has some instructions...
View ArticleRe: TP-Link MR3040 Questions
You should not use the stuff our of the "trunk" folder if possible. Try the Attitude Adjustment stuff. Paul's HowTo above and David's are useful for this device. The only thing is, you don't have a...
View ArticleRe: TP-Link MR3040 Questions
What is the safest way to upgrade to the firmware at attitude adjustment?...
View ArticleRe: TP-Link MR3040 Questions
hmmm I cannot opkg to install usb and move the .bin file, cannot wget to an internet resource as it comes back "bad address" with my gateway and ip's setup correctly. Any ideas on how to move the .bin...
View ArticleRe: TP-Link MR3040 Questions
ha take that you dastardly 3040 scp to the rescue Language: PHP$ scp openwrt-ar71xx-generic-tl-mr3040-v1-squashfs-factory.bin...
View ArticleRe: TP-Link MR3040 Questions
I am able to ssh as root into the 3040 however I cannot access any external network resources. Language: PHProot@OpenWrt:/etc/config# cat /etc/config/network config interface 'loopback' option ifname...
View ArticleCan not Connect after network Edit
So after giving up on the mr3420 I went and purchased a MR3020. I did my network edit through ssh and after that I could no longer connect to my future PB via ssh through wifi or direct connect to pc...
View ArticleRe: Can not Connect after network Edit
Ok so after putting my device in failsafe mode i was able to connect using telnet only. However when trying to re-flash the device i do not know how nor can i find any information on it. Where should...
View ArticleRe: Can not Connect after network Edit
ok now just to give more details i was able to mount to JFFS2 through telnet reedited my network config files to look exactly like the ones on the DIY. the ipaddr of 192.168.2.111 didn't not allow me...
View ArticleRe: Can not Connect after network Edit
Question do my dns list in the edit need to match the dns settings of my router? ie instead of 8.8.8.8 does it need to say 192.168.0.254 (which is the dns listed on my home router)
View ArticleRe: TP-Link MR3040 Installation Trials and Tribulations
Hi, the problem is a wrong gateway and dns address: option gateway '192.168.1.0' list dns '192.168.1.0' 0 is like an alias for the network 192.168.1.x So you have to find out, what the IP adress of...
View ArticleRe: Can not Connect after network Edit
what is your home-network IP adress like 192.168.2.x ? or 192.168.0.x Did you connect the piratebox with an ethernet cable to your router (home-network) ?? It sounds like you simple remove the calbes...
View ArticleRe: TP-Link MR3040 Installation Trials and Tribulations
My internet router/dsl modem is on my home network at IP address 192.168.1.0 and I was using 192.168.1.1 for the pirate box. I've never had a problem running my router at the 192.168.1.0 address but...
View ArticleRe: TP-Link MR3040 Installation Trials and Tribulations
Sigh, each step seems to have something unique to play/deal with...but I don't seem to have bricked it yet! I have no idea why I seem to be an error magnet with this 3040...it's got to be the user!...
View ArticleRe: TP-Link MR3040 Installation Trials and Tribulations
Hi, the problem is the following line: kernel (= 3.8.10-1-d1439517a92860b492bf085353ea16b5) * This is because the trunk images are not stable... Try this image-version / download-link instead:...
View ArticleRe: TP-Link MR3040 Installation Trials and Tribulations
or you use my image: Language: PHPhttp://piratebox.aod-rpg.de/mesh_test/openwrt-ar71xx-generic-tl-mr3040-v1-squashfs-factory.bin This has all needed drivers included, so you can step directly to opkg...
View ArticleRe: Can not Connect after network Edit
Hi My home router ip address is 192.168.2.1 My piratebox IP address ("option ipaddr" in network file) is 192.168.2.111 (ipaddr currently, went back and changed it. i had to disable my wifi security...
View ArticleRe: Can not Connect after network Edit
ok i finally succeeded SSHing in the mr3020 through my gateway router. How i did it was after connecting my direct ethernet cable from my pc to my home router I noticed my Lan IP was 192.168.2.2...
View ArticleRe: Can not Connect after network Edit
ok i have successfully installed piratebox.HOORAY! :)-D>:D<(:P) but.... When i tried to install the image board it gave me a permission denied error. I know you (Matthias) will want to see the...
View Article