Re: WR703N extroot and swappable storage?
Hi Matthias, Thank you for the detailed response. I'll tell you what I did so far. So I curently only have a single USB port (hub hardware mod is in progress), I updated to 1.0 by flashing the custom...
View ArticleRe: Did I waste $35?
run mount_root in the guide means: run the command: mount_root and not run mount_root ;) This will let you set the password afterwards. Also note that in the first 11 steps you dont need internet...
View ArticleRe: WR703N extroot and swappable storage?
Ok, I had my box set up with USB hub and 2GB insternal USB set as root overlay, installed piratebox as in your post above and now the device does not boot (flashing light), just before it finished...
View ArticleRe: (tu)[User Guide] UPDATED - MR3020 NEW Installation Piratebox 0.5.1 with...
How does one get to read your responses to queries posted.
View ArticleRe: WR703N extroot and swappable storage?
Mh, I think the first thing, what you need to do, before heading to a total manual install, is to ensure, that your USB sticks always have the correct device node and they are not mixing up between...
View ArticleRe: WR703N extroot and swappable storage?
OK, I found the problem. It seems the hub is not supplying enough power, and when I read from the card the USB device is reset and the card becomes unmounted. I have no idea how I can fix the power...
View ArticleRe: WR703N extroot and swappable storage?
alright @ mounting you can only use powered usb hubs, that's it. The router's usb port isn't providing enough power... :/
View ArticleRe: WR703N extroot and swappable storage?
I see, maybe I can hot wire the hub straight into the 5v rail? I have the data sheet for the hubs USB controller so I'll check what kind of power it can provide. Finding a powered hub small enough to...
View ArticleRe: WR703N extroot and swappable storage?
it MAY help. but I have no idea electro-techs
View ArticleRe: WR703N extroot and swappable storage?
Thanks Matthias, I have soldered a 100uF capacitor onto the power rail of the hub and it seems to behave properly now. I still don't have a way to setup piratebox on my current config so you help...
View ArticleRe: Did I waste $35?
I tried it that way too, and it didn't do anything other than give me a lot of errors, based in it being a read only operating system.
View ArticleRe: Did I waste $35?
It doesn't make the changes though, because it's read only...so no password is set, and thus the SSH connection is refused.
View ArticleRe: Did I waste $35?
In Failsafe mode, the ssh mode does never work. If mount_root won't have effect. can you post a screen shot again while being in failsafe mode and setting a password?
View ArticleRe: Mr3040 opkg help
you first have to fetch a new package list the command is: opkg update after that you can install packages from the online repo. One side note thoug, if you use a trunk release the kernel packages go...
View Article[Help] How to restrict internet access to client devices after connecting PB...
Hi, I need to block internet access to client devices when my PB is connected to home router and need internet access to PB to sync data from server. so please suggest me a detail how to for achieving...
View ArticleRe: [Help] How to restrict internet access to client devices after connecting...
Hi, as I already pointed out in a different thread: 1. change network config to: /etc/config/network config interface 'loopback' option ifname 'lo' option proto 'static' option ipaddr '127.0.0.1'...
View ArticleRe: [Help] How to restrict internet access to client devices after connecting...
Thanks Matthias.. you are genius... It worked for me :)
View ArticleRe: [Help] How to restrict internet access to client devices after connecting...
I'm happy that it is finally working :D
View Article