MR3020 Installation as followed from piratebox DIY
Hi,,,hate to crash in...ihad the same problem...i installed open wrt, it somehow got bricked (MR3020). Managed to unbrick it using fail safe mode. Now i have openwrt installed. How do i install...
View ArticleRe: Problem installing on WDR3600
Yeah it works nice in the wdr3600 without this www offlload feature! No Problem! Matthias, I'd like to suggest a mention to this link in the OpenWrt HowTo session of the site:...
View ArticleRe: Login Redirect & Changing SSID & FTP/IRC
You can tell the user to open a browser in the SSID ; ) Kind of a silly practical solution, but works well. My SSID in Brasil it's something in portuguese like "lets share! - Open your browser and try...
View ArticleRe: Problem installing on WDR3600
Hi Surian, yes, about that tutorial you are right. We wanted to focus on the most common way to install the PirateBox, and afterwards we slowly migrate those howtos down in the page as well. We didn't...
View ArticleRe: MR3020 Installation as followed from piratebox DIY
Hi, try the following recovery howto: http://piratebox.cc/openwrt:reflash_with_usb After the first reboot, shut the box down, take the usb stick and recopy the content of the install folder to the usb...
View ArticleIPv6 on PirateBox Openwrt v1.0.0
Greetings, I have successfully configured PirateBox on a TP-Link TL-MR3020 v1, but have having problems configuring IPv6. ifconfig shows the fe80:: link local address, but various configurations of...
View ArticleRe: IPv6 on PirateBox Openwrt v1.0.0
Hi Rich, use the fork-project "LibraryBox", it already has a full IPv6 implementation using radvd. The changes for a working implementations are prepared for the next version. Matthias
View Articlelooking to connect multiple mifis to one network
my situation calls for multiple mifis(3/4g wireless cellular routers) to be connected to a pirate box this is due to bandwidth issues, and yeah. The setup i am going for is a printer share, file...
View ArticleRe: MR3020 Installation as followed from piratebox DIY
Oh damn..i was using a 3.0 thumbdrive...maybe thats why i couldnt complete the installation.... By the way...do i have to install the usb through linux commands first? Or the build that i downloaded...
View ArticleRe: MR3020 Installation as followed from piratebox DIY
Hi finally got piratebox up and runnning.... But what is the kareha admin pass and secret used for? or shall i say when is it used? Thanks in advance. carnby77
View ArticleRe: MR3020 Installation as followed from piratebox DIY
Anybody out here???yohooooooooo.....
View ArticleBricked my MR3020, opened it up and confused where to solder a 10k resistor...
Hello, today I screwed up. I bought a MR3020 a couple of days ago and it arrived today. Needless to say I screwed up somewhere along the line and now it's not even connecting through Ethernet. It...
View ArticleRe: looking to connect multiple mifis to one network
Hi, why not? How did you configure the mifis ? Matthias
View ArticleRe: MR3020 Installation as followed from piratebox DIY
Language: PHP# System config use constant ADMIN_PASS => 'somethingsomething'; # Admin password. For fucks's sake, change this. use constant SECRET => 'a1b2c3d4e5f6d'; # Cryptographic secret....
View ArticleRe: MR3020 Installation as followed from piratebox DIY
Hi, sorry, I have a real life ;) The SECRET is used for encrypting within kareha, the ADMINPASS is used for deleting posts. If you don't want to use the kareha board, you should remove the link to the...
View ArticleRe: Bricked my MR3020, opened it up and confused where to solder a 10k...
Some Instructions about serial access IMHO you don't need to solder that resistor... I never needed it.
View ArticleRe: MR3020 Installation as followed from piratebox DIY
Camby, How did you get it to work eventually? I also was trying to use a usb 3.0 drive to install and it failed. I was able to run mtd write -r open... firmware after I mounted /dev/sda to /mnt/usb,...
View ArticleRe: MR3020 Installation as followed from piratebox DIY
Hi....try to hard reset your tp-link device. Then reflash using with files on the usb 2.0. I initially tried with usb 3.0 and messed up all the installation. But you should try without hard reset....
View ArticleRe: MR3020 Installation as followed from piratebox DIY
Still having some problems. Is it because of my brand of usb drive that it is not showing up as /dev/sda1, but /dev/sda? I tried mounting the drive. I killed the two processes called box_installer,...
View ArticleRe: MR3020 Installation as followed from piratebox DIY
Strange. Ok, sometimes USB drives can be used without a partition directly formatted. Make sure it has a proper partition using fdisk, and the partition is formatted with FAT32. It seems, that some...
View Article