Re: Known hardware - firmware combinations
Hi, the firmware from the beta location is the same like in stable right now. Matthias
View ArticleRe: Ext3 install support for large disks
I will transfer the howto to piratebox.cc when I have an additional howto for an installation off a ext3 partition. my piratebox.aod-rpg.de is my dev. wiki :) Thank you for the feedback. Would be...
View ArticleRe: TL-MR3020 timesave - doesn't work
Hi smipes, no worries about the language. Can you please check & post the content of the timesave cat /opt/piratebox/share/timesave_file And I need the content of the rc.local file cat...
View ArticleRe: Going to google.com in my browser takes me to piratebox home page!
Hi, delete the browser cache, that should help. Matthias
View ArticleRe: TP-Link mr3040 v 2.3 : what tutorial to install PirateBox ?
I'm having issues with my v2.3. I flashed using the .bin on [stable.openwrt.piratebox.de] and ran into issues where I could telnet, but would get insufficient space messages on nearly every command -...
View ArticleRe: TL-MR3020 timesave - doesn't work
Mh, that's weird. There is no "timesave_file" root@piratebox:~# date Thu Jan 1 00:03:55 UTC 1970 root@piratebox:~# cat /opt/piratebox/share/timesave_file cat: can't open...
View ArticlePotential Piratebox upgrade - Hame MPR-A2
While browsing for potential Piratebox hardware, I stumbled across the Hame MPR-A2. Seems like a small, promising router. - Portable 5200mAh powered wireless 3g router - CPU 360mHz - 8Gb Flash - 32Mb...
View ArticleHelp Installing on MR3040
These are my first attempts at linux, OpenWrt, and PuTTY, so am just now learning to Telnet and SSH. Apologies for ignorance. At least I've not bricked the handsome little 3040. Yesterday got the...
View ArticleRe: TL-MR3020 timesave - doesn't work
I was just looking around to try and find the answer to exactly the same problem ... My PirateBox is an TL-MR3040. Outputs to both those shell commands are identical to Smipes' above. I also tried:...
View ArticleHow to undo "piratebox nodns" ?
Hi i followed the guide to install piratebox on a mr-3020 and it worked wonderful. then i sought a way to give internet to the wlan clients, so i searched and followed the guide again and executed...
View ArticleRe: Help Installing on MR3040
The MR3040 v2+ is a tempermental one to get set up. Have you tried failsafe mode? Remove the drive, turn it on, count to 5, and then press the reset button and hold it for 3 seconds. Once in failsafe...
View ArticleRe: TL-MR3020 timesave - doesn't work
Hi, I think I just got the idea of the problem: The initial timesave did not work, because the box itself hasn't set a date&time. I created a fix a while ago, that the Box only creates the...
View ArticleRe: How to undo "piratebox nodns" ?
Hi, nodns has nothing todo with the DHCP functionality. nodns only switches the resolv.conf entry to not point to itself anymore and use a given nameserver. If you connect your PBx via ethernet to a...
View ArticleRe: Potential Piratebox upgrade - Hame MPR-A2
8MB flash.. anyway, would work, you only need to create the installation by hand and do some modifications to get piratebox started on trunk images. If you need further instructions, report back....
View ArticleRe: TP-Link mr3040 v 2.3 : what tutorial to install PirateBox ?
Hi, MR3040 with red light is "battery empty". If you have the "no space" issue, only do a reflash from the USB stick. I recommend copying the bin file from USB to /tmp/ before reflashing. Be sure,...
View Articledetermine version of squashfs-factory.bin
I have an mr3040 that I wish to set up as a pirate box. How do I determine which version of squashfs-factory.bin to download?
View ArticleRe: determine version of squashfs-factory.bin
[stable.openwrt.piratebox.de] Take the one with your routers name in it. I would take the newer version [stable.openwrt.piratebox.de]
View ArticleRe: Help Installing on MR3040
Hi everyone, I watched that topic a while now. But beside some beginner questions (when and why does putty terminate), I will to add a few informations: 1. Auto installation does restart if the file...
View ArticleRe: Do I need to change the IP address?
Bud, please checkout our OpenWRT mod page. We are not using the /etc/config/dhcp configuration. Matthias
View Article