Re: Problem with install on MR3040 v1
How big is your USB Stick? When you start over with a new try, start with reflashing your box.
View ArticleRe: Made some mods and now PB won't start.properly.
Hi, checkout, or post, your piratebox.conf - I assume you made mistake in the configuration file piratebox.conf - this can be a special character or a missing ' " Matthias
View ArticleRe: Made some mods and now PB won't start.properly.
Thanks Matthis. Since I was able to ssh, I just decided to reinstall and keep better track of what changes I have been making. Tom
View ArticleTL-MR3020 stuck on installation of PirateBox
Hello, I´m from Argentina and I´m trying this excellent proyect on my TL-MR3020. Last night after read all steps I decide to work on it. First I follow the "Auto Installation"...
View ArticleRe: TL-MR3020 stuck on installation of PirateBox
Hi Diego, login to your box and run the following two commands mv /mnt/usb/install/auto_package_done /mnt/usb/install/auto_package box_installer_start.sh Let's see if that works :) Matthias
View ArticleRe: Returning MR3040 (or other TP-Link routers) back to original factory...
Will this work for TL-WR703N?
View ArticleRe: TL-MR3020 stuck on installation of PirateBox
It works Matthias....you rules!. Thanks for your time.
View ArticleIs changing my IP address necessary?
Hey guys! Is changing the IP of my computer to 192.168.1.2 to avoid an IP conflict or is it used as a "keycard" to access the router through putty? I ask this because I'm having trouble manually...
View ArticleRe: miniDLNA Autostart
Hi Denis, can you please post the output of the following commands ran on your box: cat /etc/pbx_custom_image cat /mnt/usb/install.log cat /etc/openwrt_release /etc/init.d/minidlna enabled...
View ArticleRe: miniDLNA Autostart
PBX_auto_Image_2.1 Jan 1 00:00:33 OpenWrt syslog.info syslogd started: BusyBox v1.19.4 Jan 1 00:00:33 OpenWrt user.notice root: /bin/box_installer.sh : executing run_test Jan 1 00:00:33 OpenWrt...
View ArticleRe: Is changing my IP address necessary?
In case of a situation, where the box isnot working as expected using a static ip you can describe it as a "key card", yes. It is quite uncommon to brick the device, the only way to really brick it,...
View ArticleRe: miniDLNA Autostart
thanks, seems minidlna wasn't enabled during post-install steps. Run: /etc/init.d/minidlna enable verify with /etc/init.d/minidlna enabled &&echo "minidlna enabled to bootime" Matthias
View ArticleRe: miniDLNA Autostart
Thank you! You should change Instruction. 6. Finally, start the UPnP Media Server with: /etc/init.d/minidlna start
View ArticleRe: miniDLNA Autostart
Yes and no :) minidlna start only starts it once -- minidlna enable enables it for boottime
View ArticleNeat little problem that google has no answer for
I was hoping that my first post on this forum would be a report of success, but unfortunately I'm having serious troubles with getting my mr3040 started. So here's the thing: I did my first try...
View ArticleRe: Problem with install on MR3040 v1
Sorry for the delay... Now i am with a Kingston 16 Gb (data traveler se9). I reset the MR3040 v1 and connect it with a static 192.168.1.2 IP. Next : telnet 192.168.1.1 root@OpenWrt:/# passwd...
View ArticleRe: X( WARNING TP-Link TL-WR703N v1.7. X(
Has anyone been able to flash openWRT onto a TL-Link TL703N ( 3.17.1 Build 140120 Rel.56593n ) ? I'd rather find a software fix rather than taking the old 703n from my Avalon ASIC miner, unsoldering...
View ArticleRe: Is changing my IP address necessary?
Thanks for the quick reply, Matthias! I appreciate the hard work you do here on the forums! :)-D
View ArticleRe: Neat little problem that google has no answer for
Can you take the usb stick from the device to your computer and check if there is an install.log file and if there is a file called auto_package or auto_package_done ? Matthias
View Article